The water-based stencil cleaning machine is mainly aimed at SMT stencil cleaning in the electronic industry using water-based cleaning liquid.
The machine consists of cleaning system, rinsing system, drying system and filtering system. The machine uses electricity and gas as its energy source, and manually puts the stencil into the cleaning room. After setting the cleaning, rinsing, drying and other related parameters by the touch screen, press the start button, and the mesh board will be automatically cleaned, rinsed and dried.
The machine is very convenient for operators to clean the stencil, greatly improving production efficiency and quality. The equipment uses water-based liquid or DI water as cleaning agent, without any potential safety hazards and harmless to personnel.
◆High Pressure Spraying System for Cleaning Stencil with Water-based Cleaning Fluid
◆Double liquid tank, equipped with heating system, implementation needs cleaning-rinsing-drying
◆Cleaning process: cleaning - chemical isolation - rinsing (open loop/closed loop) - drying.
◆Preparation of advanced automatic touch screen operating software, Program parameters can be saved, Easy to use
◆The counting function of the system can automatically accumulate the number of cleaning stencils and the number of circulating filters
◆Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status in time
◆Integral stainless steel body, strong and durable, resistant to acid, alkali cleaning fluid, etc
◆Rinse water can be filtered by ion to achieve long time zero discharge
◆High-pressure fan + hot air drying, drying effect faster and thorough
◆Lower operating costs, only 50-120 ml of liquid is needed for each cleaning. After cleaning, compressed air is used to recover pipeline and pump residual liquid, which can reduce liquid consumption by 50%
|
Dimension（mm） |
L1600*W1160*H1920 |
|
Applicable stencil size （mm） |
L740 *W740 * H40(max) |
|
Power supply |
AC380V 50HZ |
|
Total power |
33KW |
|
Gas source |
0.4～0.7Mpa |
|
Source of water |
0.2～0.4Mpa |
|
Exhaust port |
Ø125 |
|
Cleaning/Rinsing liquid tank volume |
60L*2PCS（max） |
|
Optimum liquid usage |
40L*2PCS |
|
Cleaning fluid isolation time |
40S |
|
Clean time |
3～8Min |
|
Rinse time |
3～10Min |
|
Dry time |
3～10Min |
|
Cleaning and rinsing methods |
Left and right movable high pressure liquid spray cleaning |
|
Drying method |
High pressure hot air shearing (optional super type) |
|
times of rinsing |
1-99 times (settable) |
|
Cleaning liquid recovery filtration |
Filtration of 5 microns (filtering microorganisms: red gum and contaminants) |
|
Rinsing liquid discharge filtration |
Filtration of 5 microns (filtering microorganisms: red gum and contaminants) |
|
Liquid heating temperature |
Room Temperature to 60 ℃ |
|
DI Water Supply |
30～60L/min |
|
DI Water Pressure |
0.2--0.4Mpa |
|
DI Water Access Connection Pipeline |
3/4 inches |
|
noise |
Less than 60 decibels |
|
Net Machine Weight |
500Kg |
Malaysia
