About SUNMILL JHV-1800 / 2000
| ITEM | UNIT | JHV-1800 | JHV-2000 | |
| TRAVEL | X Axis Travel | mm | 1,800 | 2,000 |
| Y Axis Travel | mm | 900 | ||
| Z Axis Travel | mm | 750 (1,000 Opt.) | ||
| Distance From Spindle Nose To Table Surface | mm | 150-900 (150-1,150 Opt.) | ||
| Spindle Center To Column Surface | mm | 950 | ||
| TABLE | Table Area | mm | 1,850*900 | 2,050*900 |
| Max. Table Load | kgs | 2,500 | 3,000 | |
| T-Slot | mm | 6*18*145 | ||
| SPINDLE | Spindle Taper | type | BT-50 | |
| Spindle Speed | rpm | 6,000 | ||
| FEED RATE | Rapid Traverse (X,Y,Z) | m/min | 24 / 24 / 15 | |
| Cutting Feed Rate | m/min | 1-10,000 | ||
| ATC | Magazine Type | type | Arm | |
| Tool Magazine Capacity | pcs | 24 | 32 (Opt.) | |
| Max. Tool Diameter | mm | 110 / 220 | 125 / 225 | |
| Max. Tool Length | mm | 300 | ||
| Max. Tool Weight | kgs | 15 | ||
| MOTOR | Spindle Motor | kw | 11 / 15 | 15 / 18.5 |
| X, Y, Z Axis Motor | kw | 7 / 7 / 7 | ||
| BALL SCREW | Diameter Of X, Y, Z Axis | mm | 50 | |
| Pitch Of X, Y, Z Axis | mm | 10 | ||
| GUIDEWAYS | Width Of Linear Guideways (X,Y) | mm | 45 (8 Blocks Of Each Axis) | |
| Width Of Box Ways (Z) | mm | 140 (55 Thickness) | ||
| OTHER | Machine Diameter | mm | 5,800*4,000*3,650 | |
| Machine Weight | kgs | 17,500 | 18,500 | |
| •Specification is subject to change without further notice. | ||||
Malaysia
