Properties
| Bonding agent | Resin |
| Grain | Aluminium oxide |
| Coating | Close |
| Backing | Y-polyester |
| Stainless steel | |
| Wood | |
| Steel | |
| NF metals | |
| Plastic |
The abrasive belt CS 308 Y by Klingspor has a clearly defined area of application - the sanding of hard materials with large machinery. It is equally applicable for long belt and wide belt sanders. It performs equally well when used with pedestal sanders. This premium product is recommended for sanding on
The abrasive belt CS 308 Y by Klingspor was engineered especially for machine sanding at a high removal rate. To ensure the durability and stability required for this type of application, the abrasive belt CS 308 Y has been manufactured with tear-resistant polyester as the backing material. This material allows for large-area sanding at a high rate of speed. The high portion of polyester contained in the backing material makes this abrasive ideal for work in environments with especially high humidity.
The abrasive belt CS 308 Y by Klingspor comes with close grain coating. The grain used for this product is aluminium oxide. The abrasive material is bonded to the polyester belt by means of a synthetic resin blend. These properties make it the perfect solution for sanding edges and surfaces and for deburring metal. The abrasive belt CS 308 Y can be used even under higher loads.
The abrasive belt CS 308 Y is available in grit sizes ranging from low to medium. A medium grit size is recommended for surface stock removal or calibrating on wood. To produce an even smooth finish, it is advisable to use an abrasive material with a smaller grit size. The necessary width varies with the machine used.
The abrasive belt CS 308 Y comes with a close coating and ensures a high removal rate. Upon request, this premium abrasive belt can be supplied in sizes specific to the customers needs.
We carry a comprehensive range of abrasive belts - from the smallest file belt for hand-operated machines to wide belts for large grinding machines. All products we make originate in our own production facilities where we complete all manufacturing steps from making the basic product to finishing the ready-to-use belt.
We engineer the combinations of our synthetically produced grit types including aluminium oxide, silicon carbide, zirconia alumina and ceramic aluminium oxide, of our backings made of paper, cotton cloth, non-woven polyester web and blended fabric and of our basic bond for the power transmission between grit and backing specifically to the requirements of each material.
The bulk of our abrasive belts is available from stock. Belts that we do not carry in stock are available on short notice as well. What is more, our production facilities are capable of manufacturing custom products that include special belt joints and belt edges and are suitable for special applications and machinery.
Our experts manning our customer hotline are always there for you to provide application technology consulting regarding, for example, specific applications, the most suitable belt joint and other types of information.
更多 Kinetic Hardware Supply Sdn Bhd 相关资料
Malaysia
