Specifications
| Specifications | |
|---|---|
| Model | CS-BC1-B2 |
| System Parameters | |
| Processor | High-Performance Embedded SOC Processor |
| Operating System | Linux |
| Camera Parameters | |
| Image sensor | 1/2.8” 2-Megapixel Progressive Scan CMOS Sensor |
| Lens | 2.8 mm @ F1.6; 128° (Diagonal), 108° (Horizontal) |
| Lens Mount | M12 |
| Night Vision | IR Distance:10m, IR-cut filter with auto-switching |
| Video Parameters | |
| Video Compression | H.265 |
| Max. Resolution | FHD 1920 x 1080 |
| Frame Rate | 15fps. Self-Adaptive during network transmission |
| DNR | 3D DNR |
| WDR | DWDR |
| Audio Parameters | |
| Audio Input | Built-in omnidirectional microphone |
| Audio Output | Built-in loudspeaker |
| Audio Quality | Noise suppression |
| Camera Event | |
| Sensor | PIR Motion Detection Sensor |
| Alarm | Customized Alert Area |
| Siren | 105 dB built-in siren |
| Camera Network Parameters and Storage | |
| Wireless | Built-in 2.4G Wi-Fi |
| Network Configuration | AP Pairing |
| Minimum Network Requirement | 1Mbp |
| Local Storage | Support MicroSD card up to 256 GB in Base Station |
| Cloud Storage | EZVIZ Cloud Storage |
| Base Station Parameters | |
| Camera pairing | Support up to 4 BC1 cameras |
| Buttons | 1 SYNC button; 1 POWER button; 1 RESET button (hold 5 seconds to RESET) |
| Siren | 125 dB built-in siren |
| Local Storage | MicroSD card slot on the base station (up to 256 GB) |
| Antenna | 2.4G: 2 internal @ 3dB |
| Indicator | RGB 3 LED Indicator; 1 network Indicator |
| USB | Do not support |
| Network Interface | 1 RJ-45 10/100Mbps Self-adaptive Ethernet WAN interface. |
| Wireless Interface | Support 2.4G connection. The actual available channels vary according to the sales area regulations. Theoretical maximum rate is 144M at 802.11b/g/n. |
| Power | 12V/1A typical power consumption < 12watts; The adapter supports a wide voltage range from 100V~240V |
| General | |
| Operating Conditions | -20°C to 45°C (-4°F to 113 °F), Humidity 95% or less (non-condensing) |
| Power Supply | 12900mAh Rechargeable Lithium Battery or 5V DC |
| Power Consumption | Max. 5W |
| IP Grade | IP 66 |
| Dimensions | Camera: 104.76 x 62.80 x 62.80 mm (4.12 x 2.47 x 2.47 inch) |
| Base: 81.97 x 63.97 x 160.22 mm (3.23 x 2.52 x 6.31 inch) | |
| Packaging Dimensions | 260.00 x 217.00 x 180.00 mm (10.24 x 8.54 x 7.09 inch) |
| Weight | 1684 g (59 oz) |
| In the box | |
| In the box: | - 2x BC1 Cameras |
| - Base Station | |
| - 2x Magnetic Bases | |
| - 2x Screw Bases | |
| - Power Adapter (For Base Station) | |
| - 1x Power Adapter (For Camera) | |
| - 1x USB Cable | |
| - 2x Mounting Plates | |
| - 2x Drill Templates | |
| - 2x Screw Kits | |
| - Regulatory Information | |
| - Quick Start Guide | |
| Certifications | |
| Certifications: | CE/FCC/WEEE/ROHS/REACH/UL |
Malaysia
