H3C CR16000-M : 马来西亚的首选 IMPACT ARROW SOLUTION SDN BHD

详情

H3C CR16000-M Series Router

H3C CR16000-M routers are digital era-oriented cloud service routers applicable to government, finance, transport, power grid, healthcare, education, and carriers. With a carrier-level HA and programmable NP architecture design, the router provides abundant features to process cloud services, carrier-level high availability, and exceptional forwarding capacity.
With high-density 100GE, 10GE, and GE ports and 155M/622M/2.5G POS, CPOS, and E1/T1 WAN ports, the routers can be deployed at different network positions. The router runs the state-of-the-art Comware network operating system, which is open, containerized, and programmable to meet user requirements in new businesses.
The router offers the following features:
SRv6, which provides customized programming, global control and scheduling, open network construction, simplified Ops deployment, and visible display in cooperating with AD-WAN controllers.
iFIT, which provides visible service quality display and fast troubleshooting.
FlexE and channelized sub-interfaces, which meet the network slicing requirement at different layers, allowing for strict isolation of different services and SLA for key services.

Features:
Abundant cloud services

Supports SRv6, which allows one-hop access to the cloud and simplifies service provisioning.

Supports iFIT and Telemetry, enabling service status report in real time and granular network monitoring for refined management and effective service assurance.

Supports AD-WAN carrier and branch network solutions, enabling network intelligent scheduling and refined management and prediction of network trends through service emulation and failure testing.

Supports network slicing technologies such as FlexE, channelized sub-interfaces, and Flex-Algo. Using network slices at different layers including the physical layer, network layer, and transport layer, the router can separate services of different tenants in the cloud and provides SLA for different services.

Carrier-level high availability

With the carrier-level hardware framework design, the router supports physical isolation of control, services, and switching, and provides independent switching fabric modules.

Supports MPU and switching fabric module 1+1 redundancy.

Supports front-to-rear airflow and supports redundant fan trays that provide 12 fans in total.

Supports power module N+M redundancy and built-in AC and DC power modules.

Supports BFD for BGP/IS-IS/RIP/OSPF/static routing and NSR/GR switchover.

Green design

High-efficient heat dissipation—Adopts the front-to-rear airflow design, increasing heat dissipation efficiency by 40%. The router uses fan tray micro-modularization to make sure that the average module temperature is 5°C (41°F) lower than that in traditional mode. It also supports stable heat dissipation through air deflectors.

Energy efficiency and consumption reduction—Supports low-power mode configuration through SerDes, cutting-edge DDR controllers, on-demand core startup, and flexible processor frequency configuration. Compared to the preceding generation, the NPs used on the CR16000-M routers have reduced power consumption by 41%.

Intelligent power module management—Supports powering on modules in turn, which ensures long operation of the router and decreases EMI.

Automatic fan speed adjustment—Supports fan tray status monitoring and fault alarms based on module temperature and automatic fan speed adjustment based on the ambient temperature and module configuration to reduce power consumption and operating noise.

Specification:

Item	CR16000-M8	CR16000-M16
Bi-direction Forwarding Capacity	800Gbps	800Gbps
Chassis	Integrated chassis, which can be installed in a 19-inch rack
MPUs	2	2
Line cards	8	16
Independent switching fabric modules	2	2
Cooling	Front-to-rear airflow	Front-to-rear airflow
Independent fan trays	Independent fan trays in redundancy	Independent fan trays in redundancy
Power system	Four built-in AC and DC power modules (N+M redundancy), without occupying any service module slot.	Four built-in AC and DC power modules (N+M redundancy) , without occupying any service module slot.
Dimensions (H × W× D)	267 × 440 × 440 mm (10.51 × 17.32 × 17.32 in, 6 RU)	356 × 440 × 440 mm (14.02 × 17.32 × 17.32 in, 8 RU)
Ports	FE, GE, 10GE (LAN/WAN), 100GE, 155M POS, 622M POS, 2.5G POS, CPOS, ATM, and E1/T1 ports Interface type changing between 100GE and 40GE Interface type changing between 155M POS, 622M POS, and GE Interface type changing between ATM/ and POS
Unicast routing	IPv4/IPv6 dual stack Static routing, RIP, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, and BGP4+ VRRP and VRRPv3 IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, traceroute IPv6, socket IPv6, static IPv6 DNS, specified IPv6 DNS server, and TFTP IPv6 client IPv4 to IPv6 transition ICMPv6 MIB, UDP6 MIB, TCP6 MIB, and IPv6 MIB ECMP and UCMP Policy-based routing Routing policy Tunnels such as GRE Static routing FRR, OSPF FRR, ISIS FRR, and BGP FRR
Multicast	Routing protocols, including PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Anycast-RP IGMPv1/v2/v3 and IGMP snooping v1/v2/v3 PIM6-DM, PIM6-SM, and PIM6-SSM MLDv1/v2 and MLD snooping v1 Multicast policy and multicast QoS
MPLS VPN	MPLS label distribution protocols such as LDP and RSVP-TE P/PE compliant with RFC 2547bis Three inter-AS MPLS VPN methods (option1/option2/option3) HoPE Multi-role host L2VPN, L3VPN, inter-AS L2VPN and L3VPN MPLS TE FRR and LDP FRR, with a switchover time of not more than 50ms 6PE and 6vPE Distributed multicast VPN ACL, which identifies traffic and forwards the traffic to different VPNs MPLS VPN network troubleshooting features, including MPLS ping and MPLS traceroute L2VPN access to L3VPN Access to VPLS via QinQ
BRAS service	PPPoE, PPPoEoVLAN, and PPPoEoQ access authentication Layer 2 portal, Layer 3 portal, and QinQ portal access authentication IPoE, IPoEoVLAN, and IPoEoQ access authentication Leased access authentication such as subnet-leased, interface-leased, and L2VPN-leased access authentication L2TP Layer 2 transparent access and Layer 3 transparent access Authentication, authorization, and accounting cooperating with standard RADIUS/TACACS+ protocol RADIUS, TACACS, and COPS protocols iTA, which differentiates services by destination addresses to perform accounting, bandwidth control, and QoS Unified wired and wireless authentication solutions, which meet the demands for massive user access and wireless client mobility BRAS IRF, which offers redundancy and simplifies Ops
ACL	IPv4 and IPv6 ACL and EACL Ingress/Egress ACL Hardware-based ACL
QoS	HQoS Queue scheduling mechanisms such as PQ, WFQ, and CBWFQ More granular and flexible traffic control through HQoS Traffic shaping Congestion avoidance technologies such as tail drop and WRED drop Priority marking and remarking 802.1p, TOS, DSCP, and EXP priority mappings Congestion avoidance, traffic policing, and traffic shaping Data packet marking based on IP addresses, port numbers, 802.1P, and DSCP values Data packet multilevel queue mechanisms include CQ, PQ, LLQ, and WFQ Multicast QoS
Ethernet features	802.1Q ARP 802.1Q VLAN trunk QinQ termination 802.3d (STP)/802.3w (RSTP)/802.3s (MSTP) IEEE 802.3ad (link aggregation), static link aggregation, and link aggregation across different modules Aggregation of ports with different transmission rates Port mirroring and flow mirroring FlexE Channelized sub-interfaces
SDN technologies	VXLAN and EVPN PCEP protocol Network information collection protocols such as BGP-LS NETCONF and YANG MPLS SR and SRv6 CBTS OpenFlow BGP FlowSpec Telemetry 5G bearer network technologies such as EVPN, SRv6, and 1588v2
Traffic analysis	NetStream, which supports the version 5, version 7, and version 9 data export formats, sampling, and flow statistics Multi-log host Hardware-based NTA IPv4/IPv6/MPLS traffic collection and analysis Traffic collection and analysis in the inbound and outbound directions of interfaces Abnormal traffic detection and monitoring
High availability	MPU, switching fabric module, power module, and fan tray redundancy Separation of the control plane and switching plane Independent switching fabric modules Automatic fan speed adjustment Built-in DC and AC power modules, which can be installed on the same router and do not occupy service slots NSF, NSR, and GR BFD, which supports fast failure detection and a switchover time of not more than 50ms iFIT, which can detect network failures in real time, troubleshoot the network failures, and implement visible management over performance data
System management	In-band and out-of-band network management Console/AUX Modem/Telnet/SSH2.0 CLI-based configuration FTP, TFTP, XMODEM, and SFTP file uploading and downloading management SNMP v1/v2/v3 RMON v1/v2 (groups 1, 2, 3, and 9) NTP NQA Fault alarms and self-healing DHCP Data logs ICMP Syslog Traceroute Multithreading access to the device via Telnet 1588v2
Ambient temperature	Operating: 0°C to 45°C (32°F to 113°F)

更多 IMPACT ARROW SOLUTION SDN BHD 相关资料

H3C CR16000-M

Features: Abundant cloud services

Carrier-level high availability

Green design

Features:
Abundant cloud services