Manufacturer : Mitsubishi Electric
FX2NC-16EX
Input extension block
Application sequencer : FX1NC, FX3GC, FX2NC, FX3UC
mass : 0.15 Kg
Rated voltage : Internal power supply from the sequencer
power consumption : 2.2 W
Input specification :
Number of input points : 16 points
Input connection shape : connector
Input format : sink
Input signal voltage : DC 24 V + 20% - 15% ripple (pp) within 5%
Input impedance : 4.3 kO
Input signal current : 5 mA / 24 VDC
Input ON sensitivity current : 3.5 mA or more
Input OFF sensitivity current : 1.5 mA or less
Input response time : About 10 ms
Input signal format : No-voltage contact input or NPN open collector transistor
Input circuit insulation : Photocoupler insulation
Input operation display : LED ON when input is ON
Ambient temperature : 0 to 55 ° C. ... Operating -20 to 70 ° C. ... Save
Relative humidity : 35 to 85% RH (noncondensing).... in operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2
Impact resistance : 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2
Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 µs, rising 1 ns, with noise si
tor with period of 30 to 100 Hz
