FS-V31P
Digital Fiber Optic Sensors
FS-V30 series
Fiber Amplifier
Cable Type
Main Unit
PNP
1-output with cable
Main unit
Control output:1 output
Monitor output (1 to 5 V):N/A
Light source LED:Red, 4-element LED (Wavelength: 640 nm)
Response time:33 ?s (HIGH SPEED)/250 ?s (FINE)/500 ?s (TURBO)/1 ms (SUPER TURBO)/4 ms (ULTRA TURBO)/16 ms (MEGA TURBO)
Output selection:LIGHT-ON/DARK-ON (switch-selectable)
Display indicator:Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display,
Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512;
Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Detection mode:Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function:OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay
timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output:PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the
expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy:Input time: 2 ms (ON)/20 ms (OFF) min.*2
Unit expansion:Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-
output type should be counted as two units.
Case material:Polycarbonate
Accessories:N/A
