Allen Bradley 150-C85NBD 45KW Soft Starter Malaysia: 马来西亚的首选 SJT SUCCESS INDUSTRIAL AUTOMATION SDN. BHD.

详情

Technical Specifications

Electrical

With display	No
Voltage type for actuating	AC/DC
Rated operating voltage Ue	200 V
Rated control supply voltage at AC 50 Hz	100 V
Rated control supply voltage at AC 60 Hz	100 V
Overload current	28.3 A
Controller type	SMC-3
DV/DT protection	1000V/µs for power circuit
Repetitive peak voltage	1400V per UL/CSA/NEMA for power circuit
Operating frequency	50/60 Hz per UL/CSA/NEMA for power circuit
Line connected motor power, max	45 kW @ 380/400/415V AC, 50 Hz, 3-phase
Delta connected motor power, max	25...100 Hp @ 460V AC, 60 Hz, 3-phase
Overvoltage category	III per IEC for side mount auxiliary contacts
Rated impulse voltage	6 kV for power circuit
Dielectric withstand	2500V AC per IEC for power circuit
Line connected motor current	28.3...85 A @ 380/400/415/460V AC, 3-phase
Delta connected motor current	50...147 A @ 380/400/415/460V AC, 3-phase
Insulation voltage	Rated 600V AC per UL/CSA/NEMA for power circuit
Rated operational voltage	250V AC/30V DC per UL/CSA/NEMA for Side mount auxiliary contacts
Rated control power during start with fan	200 mA @ 120V AC/100 mA @ 240V AC, 700 mA @ 24V AC/DC
Input OFF-state current	<10 mA, <12 mA @ input OFF-state voltage (IN1, IN2) for control circuit
Short-circuit protection device list	Non-time delay Thermal magnetic circuit breaker High capacity time delay class CC/J/L
Number of contacts	TB-97, -98 (OVLD/Fault): 1 for auxiliary contacts
High capacity available fault current, max	70 kA @ 600V, maximum current 300 A time delay Class J or Class L fuse for inside delta connected motors
Type of current	TB-97, -98 (OVLD/Fault): AC/DC for auxiliary contacts
Conventional thermal current (Ith)	TB-97, -98 (OVLD/Fault): 1 A for auxiliary contacts
Type of control circuit	TB-97, -98 (OVLD/Fault): Electromagnetic relay for auxiliary contacts
Type of contacts	TB-97, -98 (OVLD/Fault): Normally Open (N.O.) for auxiliary contacts
Utilization category	TB-23, -24 (normal/up-to-speed), TB-33, -34 (normal/up-to-speed): C300/R150 per UL/CSA/NEMA for Side mount auxiliary contacts
Rated operational current, max	TB-97, -98 (OVLD/Fault): 0.6 A @ 120V AC and 0.3 A @ 240V AC for auxiliary contacts
Standard controller feature	Soft stop
Standard available fault current, max	10 kA @ maximum standard fuse 400 A for delta device operational current rating
Integrated motor overload protection	Yes
Short circuit protection device performance (SCPD) type	Type 1
Selectable overload trip class	Trip Class 10, 15, or 20
Selectable start times	2, 5, 10, 15, 20, 25, or 30 s
Input OFF-state voltage (IN1, IN2), max	40V AC, 17V DC/12V AC for control circuit
Selectable current limit	150%, 250%, 350%, and 450% of full load current
Input ON-state voltage, during start (IN1, IN2)	85V AC, 19.2V DC/19.2V AC minimum for control circuit
Input ON-state current (IN1, IN2)	9.8 mA @ 120V AC/19.6 mA @ 240V AC for control circuit, 7.3 mA @ 24V AC/DC for control circuit

Mechanical

Degree of protection (IP)	IP2X
Weight	2.25 kg
Shock	Operational: 15 G
Width	72 mm (2.83 inch)
Depth	130 mm (5.12 inch)
Height	206 mm (8.11 inch)
Cable size	2.5...95 mm2 (14...3/0 AWG) for line power terminals
Vibration	Operational: 1.0 G peak, 0.15 mm (0.006 inch) displacement
Make	TB-97, -98 (OVLD/Fault): 432VA for auxiliary contacts
Break	TB-97, -98 (OVLD/Fault): 72VA for auxiliary contacts
Tightening torque	11.3...12.4 Nm (100...110 lb.inch) for load power terminals
Internal bypass	Yes
Function	Single direction
Selectable kick start - 450% FLA	0, 0.5, 1.0, or 1.5 s
Selectable initial torque	15%, 25%, 35%, and 65% of locked rotor torque
Selectable soft stop	Off, 100%, 200%, or 300% of the start time setting when wired

Environmental

Steady state heat dissipation	82 W
Storage and transportation temperature	-25 °C
Rated surrounding temperature range without derating	-5 °C
Humidity	5...95% noncondensing
Operating temperature	Open: -5 to 50 °C (23 to 122 °F)
EMC emission levels	Radiated emission: Class A per IEC
EMC immunity levels	Surge transient: per EN/IEC 60947-4-2 per IEC
Altitude	2000 m
Pollution degree	2

Construction

Mounting hole size	5.3 mm
Number of poles	Equipment is designed for 3-phase only for power circuit
Enclosure	Open type

Documentation

RESOURCE	PUBLICATION NUMBER
Technical Data	150-TD009
User Manual	150-UM007

Find more technical documentation for this product in the Technical Documentation Center.

Certifications

China CCC
Eurasion Economic Community
Australian RCM

This product was certified with the above certifications as of 2024-04-01. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.