Knead It Multipurpose
A versatile, hand kneadable fast setting epoxy putty that is ideal for repairing, rebuilding, reshaping or restoring almost anything. It can be drilled, filed, machined, screwed, sawn, sanded, stained and painted. Packaged in a handy roll so you can just cut off what you require and save the rest for another day, it hardens in 5-10 minutes, after mixing. Approved for contact with drinking water.
Ideal for:
Wood/Timber
Concrete
Anchoring bolts
Metal
Masonry
Plastics
Ceramics
Features:
Will not sag, run or drip
Easy to use - no mess
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
Good adhesive strength
Can be used to reshape, rebuild and repair a multitude of surfaces and applications
Good gap filling properties
Long-lasting, durable solution
Heat resistant to 120°C continuously or 140°C intermittently
Can be used under water. (but dry surfaces for application are best and recommended)
Rapid set time (<10 minutes)
Excellent anchoring properties
Directions
1. Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
2. Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
3. Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
4. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
5. Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening.
6. Hardened excess may be sanded or trimmed away once fully cured.
7. After 5-10 minutes Knead-It Multi Purpose will harden and begin to form a strong bond.
8. After 60 minutes Knead-It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
9. Wash hands thoroughly with soap and water before product hardens.
Handy Tips
1. Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from the knead-it.
2. To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
3. Ensure the surface is dry before applying the product.
Safety Tips
1. Where possible wear protective gloves when using. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
2. If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
3. Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
