Sonel TDR-420 Reflectometer
INDEX CAT. WMGBTDR420
EAN 5907624027459
Ingress protection: IP 67
Display: graphic, color, backlit Description
Diagnose faults with TDR-420
The TDR-420 reflectometer is a handy digital Time Domain Reflectometer (TDR) designed to characterize and locate faults in power and telecommunications cables. The Sonel TDR-420 reflectometer allows to measure the length of the cable and to determine the distance to the damage or impedance change in the range from 4 to 6000 m in cables with metal conductors. The shortest measuring range of 7 meters and the dead zone of 0.6 m allows user to locate a damage in a very short distance from the connection point of the device.
Product features
fault location in power and telecommunication cables
two independent cursors to indicate two fault locations and the distance between them
fault location in coaxial cables
fault location in infrastructure cables
detection of breaks, short-circuits, damage caused by moisture and other changes in cable impedance
graphic presentation of cable faults with an indication of the distance to the fault on the display
Application
TDR-420 time-domain reflectometer is designed to detect where faults in metal wires are. This product is designed for:
electrical wholesalers and cable dealers,
electrical installation companies,
maintenance personnel at manufacturing plants,
building personnel.
This device meets the expectations of all those who have to accurately locate a fault and wire end in either power or telecommunications cables.
Device capabilities
SONEL reflectometer is distinguished for their long operating range of up to 6,000 m, very low margin of error in measurement (in the order of 1%) and the ability to adjust both the velocity of propagation and the impedance of the cable which is under investigation. By using two cursors there should be no problem with determining both the distance to two faults and the distance between them.
Easy readout
The TDR-420 reflectometer is equipped with a readable colour display that, due to its 320 x 240 pixel resolution, allows the fault location to be indicated even more accurately.
Integrated Help
In the TDR-420 device a handy help function has been added to facilitate the interpretation of the result obtained during measurement. Thanks to this function, a user can quickly determine the type of anomaly that is present in the cable segment which is being examined, by comparing the displayed reflectogram with typical fault shapes.
Durable and practical casing
In response to the customers needs the new TDR-420 model has been designed to operate in difficult environmental conditions. A unique casing with the IP67ingress protection rating ensures that the device is both waterproof and dustproof. An additional advantage is the elastomer coating of the casing that prevents the device from slipping out of the hands and provides protection if it should be accidently dropped.
Technical Data
Parameter
Description
measuring ranges
20, 45, 90, 180, 360, 750, 1500, 3000, 6000, 10000, 20000 [ft] 7 m, 15 m, 30 m, 60 m, 120 m, 250 m, 500 m, 1 km, 2 km, 3 km, 6 km
accuracy
1% of selected range
resolution
approx. 1% of range
minimum cable length
4 m
velocity of propagation
within 10…99% or 15…148.5 m/μs
output impulse
5 Vp-p for an open circuit
output impedance
25, 50, 75, 100, 125 and 200 Ω
impulse width
3 ns…3 μs (depending on the range)
scanning type
up to 3 scans/s or a single scan (ONCE mode)
generated acoustic signal
810 – 1100 Hz
operating time on a full battery
up to 8 hours of continuous scanning
power supply
4 x alkaline batteries 1.5 V AA type or 4 x NiMH AA rechargeable batteries
