[ TOTAL ] THT661301 CHALK LINE REEL 30M

TOTAL CHALK LINE REEL 30M
 

Features

- high quality product

- easy to use

How to use

1. Snap a basic line

2. Hook the end and stretch the string tight so it crosses directly over your mark

3. Reach out as far as you can and grab the string between your forefinger and thumb

4. To chalk a line, lift the string straight up about 4 in, and then release it

LENGTH : 30MM

WITH 1 BOTTLE CHALK

WITH 1 PCS SPIRIT BUBBLE

What Is a Chalk Box?

A chalk line or chalk box is a small tool used for marking a straight line on a large flat surface, like a wall, the floor or a rough piece of timber. Sometimes called a chalk reel, the tool is a plastic or metal case containing powdered chalk and a string line inside. The string can range in length, with some of the longer residential-use models reaching up to about 50 ft. Depending on the size, the case can hold about one to two ounces of chalk.

There is a hook on the end of the line outside the box, and there is a crank that winds the string back into the case once it’s been extended. The case itself generally has a pointed end on the side so it can double as a plumb bob. There are different sizes of chalk boxes as well as different colors of chalk that can be used.

How Do You Know if the Chalk Line Is Straight?

The best way to keep the line straight is by pulling the line tight and keeping a strong tension on the line prior to the snap. This is why it’s important to have something stable on which to secure the hook

How Do I Know If I Need New Chalk?

If your box and the string get wet, you can let the string dry before reeling it back in but you may have wet chalk inside. It’s best to open the box and clean out any caked chalk before refilling it with fresh chalk.

How Do You Maintain a Chalk Line?

Using the line carefully will keep excess tension from causing the string to break. Also, storing the box inside a toolbox can help keep the dry chalk from getting damaged by moisture.

Tips for Using a Chalk Line on Your Own

Even though it’s an easy tool to use, it can be difficult to get a straight line if there isn’t a way to secure the line and you are working on your own. Make it easier on yourself by putting a pin or a nail in the object to give the hook a landing place. You can also make a small slit in the side of the workpiece as a groove to hold the line in place. If you would rather not make a permanent mark on the surface of the workspace, you can also use tape to hold the hook in place.

If you find that the line is blurry, you may have too much chalk on the line. Stretch the string out in the air and give a pluck or two to help remove any excess chalk. This will lead to a sharp line. You can also snap the line two or three times in succession to get a clear but heavier line in the same spot.