-- Carefully pierce seal at end of metal tube with reverse end of the cap. Replace plastic nozzle.
-- Surfaces to be bonded should fit exactly and should be clean, dry, and free from dust, dirt, and grease.
-- Apply a drop of Supa Glue to only one of the surfaces to be bonded. Use sparingly. Do not spread. (Note: 1 drop covers an area of 25mm x 25mm.)
-- Quickly align both surfaces. Keep fingers away from any excess adhesive so they will not get stuck. Apply slight pressure to ensure effective spreading and bonding.
-- Allow several minutes to provide sufficient bond strength for practical use. Maximum strength is achieved after 12 hours.
Wipe the tip of the tube with a cloth or paper and replace the cap.
Limitations:
-- Not suitable for bonding plastics such as Polypropylene and Polyethylene.
-- Water-resistant not waterproof, therefore not suitable for surfaces that will be continually wet.
-- Not flexible and has low impact resistance.
-- Not suitable for repairing items that are in direct contact with hot liquids eg. saucepans or repairing handles of vessels that contain hot liquids.
-- Will not permanently bond glass or materials containing alkaline elements.
-- Has no gap filling properties therefore surfaces need to be a close fit.
-- Not recommended for highly porous surfaces.
-- Not recommended for paper or leather.
OUR WEBSITE IS http://www.velocitydiy.com
CONTACT NUMBER IS +6014-9891223
Malaysia
