| TECHNICAL PARAMETER |
|
JH-11C100-4A |
| Motor Power |
KW |
5.5 |
| |
4 Platform |
| Spindle Speed |
r/min |
2,880 |
| Disc Diameter |
mm |
1,500 |
| Wheel Diameter |
mm |
250-350 (Wide 50*150) |
| Outline Dimension |
mm |
2,800*2,600*2,200 |
| |
|
|
| Function Introduction |
: |
This Machine Is Mainly For Plane Cylindrical Products Aluminium Alloy, Stainless Steel Cup & |
| |
|
Kettle & Other Metal Materials, & The Side Surface Of Workpiece Sanding, Wire Drawing, |
| |
|
Polishing & Other Processing, Such As Stainless Steel Cup, Aluminium Pot, Kettle & So On The |
| |
|
Work |
| Features Of This Machine |
1 |
The Machine Is Equipped With 4 Grinding Heads, Which Can Be Installed In Four Different |
| |
|
Grinding Wheels |
| |
2 |
Can Install The Different Consumables Such As Flax Wheel, Cloth Wheel, Grinding Wheel, Nylon |
| |
|
Wheel & Other Different Consumables For Polishing, Sanding & Drawing Processing |
| |
3 |
Grinding Head Relative To Workpiece Can Make Electric Up & Down Or So Angles Before & |
| |
|
After Adjustment, The Loss Of Grinding Wheel Can Automatically Compensate Feed, Polishing |
| |
|
Wheel Grinding Time Can Be Set Up Accordingly To The Needs Of Different Product Effect Of |
| |
|
Intelligent |
| |
4 |
The Machine Is Equipped With Automatic Waxing Function, & The Equipment Has Failure Alarm |
| |
|
Function |
| |
5 |
The Machine Wheel Can Fine-Tune The Product, & Each Grinding Wheel Can Be Responsible |
| |
|
For Grinding Or Polishing The Different Surface Of The Product, High Efficiency, Low Labor Cost |
| |
6 |
The Machine Is Equipped With PLC Intelligent Programming System & Man-Machine Interface, |
| |
|
Whish Is Easy To Operate |
Malaysia
