DUS60: 马来西亚的首选 Truserv Technologies (M) Sdn Bhd

Specifications

0-set function via hardware pin: No
Angular acceleration: 500000 rad/s
Anti-dither: No, Yes
Certificate: EAC certificate / DoC, EU declaration of conformity, UK declaration of conformity, China-RoHS, ACMA declaration of conformity, cULus certificate
Communication Interface detail: TTL
Communication interface: Incremental
Configuration switches: 1800 PPR values, direction selection, TTL/HTL selectable, 60 PPR values, direction seletion, 240 PPR values, 1500 PPR values, direction selection, TTL/HTL selectable, 2400 PPR values, direction selection, TTL/HTL selectable, 48 PPR values, 2048 PPR values, direction selection, TTL/HTL selectable
Connection: cable, male connector
Construction size (flange): 60 mm
Direction of connection: universal
Enclosure rating: IP65
Flange type / stator coupling: 2-point stator coupling, slot, hole diameter 63 mm 83 mm, without stator coupling, flange with 4 x M2,5, Face mount flange with 3 x M3 3 x M4, without stator coupling
Housing material: Aluminum
Length of cable: 5 m, 1.5 m
Mechanical design: Solid shaft, face mount flange, through hollow shaft, rear clamping, through hollow shaft, Front clamp, blind hollow shaft
Number of cores: 8-wire
Number of pins: 8-pin, 4-pin
Operating temperature range: -30 掳C ... 90 掳C
Output frequency: + 60 kHz
Output function: A and Direction Output, A and B output, CW and CCW output, channel A, error
Product segment: Incremental encoders
Programmable/configurable: No
Programming interface: via DIP switches
Reference signal, position: 180掳 electric, gated with A
Safety system: No
Shaft diameter: 6 mm, 12 mm, 1/4″, 3/8″, 8 mm, 5/8″, 10 mm, 1/2″, 14 mm, 15 mm
Shaft length: 19 mm, 10 mm, 8 mm
Shaft material: stainless steel
Shock resistance: 100 g
Special feature: No, Yes
Specialty: 1 ... 24 pulses per revolution, Switching frequency filter, selectable by DIP switch, Reference signal 270掳
Supply voltage: 4.75 V ... 30 V
Task: Measuring - Speed and acceleration, Measuring - Angle, inclination and rotational movement, Determining position - 1D position determination
Type of connector: M12

详情

Versatile encoder with DIP switches for configurable parameters
The DUS60 is a rotary incremental encoder with built-in DIP switch configuration for the resolution, output voltage, and counting direction. The DUS60 configuration switches reduce the number of variants, enable easy replacement and quick commissioning, and increases the likelihood that spare parts will be in stock – all without any additional programming tools. The on-board status and signal LEDs and optional fault output quickly indicate the functionality of the encoder, minimizing time required for both installation and troubleshooting. The DUS60 offers solid shaft and hollow bore mounting with rotating connectors or universal cables for quick and flexible mechanical installation. With resolutions up to 2,400 pulses, the DUS60 is ideal for factory and logistics automation applications.

DUS60 AT A GLANCE
Benefits
-Quickly commission the encoder using the built-in DIP switches. No additional programming tool or laptop required
-Status and signal LEDs quickly indicate whether the encoder is properly connected, functional, or needs to be replaced
-Universal power supply and a rotatable connector reduce the number of variants required and provide increased installation flexibility
-Anti-dither functionality maintains a high level of productivity also in high vibration applications
-Compatible with existing and low-cost input cards with output types like Clockwise/Counterclockwise and Signal/Direction

Features
-Pulses per revolution: Up to 2,400
-Housing diameter: 60 mm
-Solid shaft, blind hollow shaft, through hollow shaft
-Enclosure rating: IP65
-Communication interfaces: TTL/HTL
-Connection types: M12 male connector or cable
-Status LEDs, DIP switch for configuring the settings