详情
KGT 38mm Cable Wire Stripping Machine 370w ID37425
Specifications:
Power: 0.37kw
Voltage: 220V - 50Hz
Net weight: 38kg/84lbs
Dimensions: 58X28 X37cm/23X11X14.5inch
Cable diameter: DA 1.5 mm - DA 38 mm/DA 0.06inch - DA 1.5inch
Cutting speed: 15 m/min
Packing size: 65X32X42cm/26X13X17inch
G.W.: 44kg/97lbs
Product Features:
-11 holes and 10 blades for easy access to any kind of cable or wire from the smallest to the largest
-The professional device works even where conventional grip procedures fail
-11 different guides guarantee the machining of all types of cable with variable diameter from 1 mm to 40 mm
-Do not waste time with other models of slotting machines where you need to adjust the blade every time you change the diameter of the cable
-This machine automatically adjusts itself
-Among these guides we have the ability to work flat and rigid cables
-This machine is also ideal for industrial use
-The blades and rollers rotate together at the same time by means of the gear so that the cable does not slip
-The springs are adjustable to give the right cutting pressure
Operation:
1.Comparing the wires’diameters with the feeding holes on the machine, feeding the wires one piece at one time. Before feeding the wires, please cut off the head of the wires, to avoid gaps caused to the blades.
2.On the output side, if the cuts on the wires are too deep, please check below points:
①Please adjust the handles on the input side, screw down or loose them. (M12 handles)
②Check whether the wires on the right position as you feeding them.
③Make sure the blades are sharp, if not, polish them with the oil stone.
3.On the output side, if see the plastic(PVC)has been stripped, but the copper wires can not been disgorged, please check below 4 points:
①Polish the axis of the upside with the oil stone.
②Check whether the springs are loose,if yes, screw down to make them tighten.
③The diameter of the wires are too small, please adjust the space between the two axises to 0.3-0.6mm.
④If the wires you want to strip are hot, also can not get the copper wires stripped out.
4.If the wires were blocked in the axises, please check below points:
①If the springs on the press wheels are too tight, loose them.
②There are too much oil on the cables/wires, please wipe it.
5.If see the blades tilted:
①Check whether the center adjuster was loosed.
②Centering adjustment and adjust the screws of two sides
Note:
Make sure the wires’diameter are similar with the feeding holes,large wires in large feeding holes,small wires in small feeding holes, flat wires in flat feeding holes.
Order Method :
1. Place your order on our website
2. Via Email/ Whatsapp/ SMS/ Phone Call
3. Cash & Carry any of our branches (Self Collect allowed)
===========================================
Contact Information:
Balakong:
603-89623888
603-89617328
017-3691406
017-3691038
Setapak:
603-40219399
016-6613186
016-6616801
Kajang:
603-87366972
016-2338830
Gombak:
603-40318686
016-7166820
016-6616081
Titiwangsa:
603-40319292
016-8666203
Sentul:
603-30062238
012-9380198
016-8666230
Knight Auto Sdn Bhd (Since 1999)(476359-M)
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
===========================================
Malaysia
