[ KTH ] Protective Coating Black Oxide Gloss 785G (1L/5L)

Protective Coating Black Oxide Gloss 785G

KTH 785G BLACK OXIDE PRIMER is single component alkyd solvent based primer. It is economical and general purpose primer for most general industrial steel structural painting. It gives smooth and gloss finishing to painted surfaces. However a suitable top-coat should be painted over to enhance the performance of the oxide primer.

Uses

• As a primer in a multi-coat coating system. Most suitable for use in steel, GI and other metal surfaces.

Composition

• Pigment: Black pigment
• Binder: Modified long oil alkyd resin
• Solvent: Hydrocarbon

Surface Preparation

• Previous painted surface and bare substrate must be completely dry and free from rust, mill-scale, dirt, grease and other contaminants before painting. For maximum adhesion and durability of paint performance, all bare surfaces should be prepared by meant of sand paper, hand tools, power tools and etc.

Application Method

• Method of Application: Brush, roller, and spray application.
• Product Preparation: Stir mixture thoroughly before use. No thinning is required. However, 10 - 20% of thinner can be added for workability.
• Pot Life (at 30oC): No pot life limit.

Safety Precaution

1. This product is flammable.
2. Keep away from sources of ignition.
3. Keep container tightly closed and keep out of reach of children.
4. Wear suitable personal protective clothing during painting.
5. Ensure adequate ventilation. Do not breathe or inhale spray mist.
6. Do not apply when the relative humidity exceeds 85%.
7. Avoid skin and eye contact. Spillage on skin should be removed immediately with cleanser, soap and water. Eye should be well flushed with water and seek medical advice immediately if discomfort persists.