KING TOYO Balancer Puller & Installer Tool Set [KT-6036]
Model: KT-6036
Features:
* A professional tool set for balancer replacement.
* Built-in bearing makes balancer replacing job easy and without damage.
* 4-slot puller plate plus 9 threaded adapters fit to balancers on most engines.
* For easy removal of most harmonic balancers and drive pulleys which are press-fitted onto the crankshaft.
* Features a bearing-centered, circular 2/3-way flange and an assortment of metric and fractional bolts and adapters to provide wide coverage
* Heavy-duty, 3/4'' diameter forcing screw is internally threaded to fit the eight adapters to install harmonic balancers
Application:
Puller
1. Select the threaded adapter stud of the correct size and tighten it into the crankdhaft, along with the puller shaft
and the flanged nut mounted on the puller shaft un the position shown.
2. Then mount the puller plater onto the puller shaft with the thrust bearing facing toward the crankshaft.
3. Insert two or three bolts, as needed, in the crankshaft hub or balancer.
4. Remove the balancer by turning the flanged nut. To prevent the puller shaft from turning, use a wrench to hold the threaded adapter or the hex near the pointed end, as necessary. The pointed end of the puller shaft may be used as universal puller, but a wrench may be required on the puller shaft's hex or a threaded adapter
Installer
1. Select the threaded adapter stud of the correct size, and tighten it inot the crankshaft as shown, along with the
puller shaft and the flanged nut mounted on the puller shaft in the position shown.
2. Then mount the puller plate onto the puller shaft with the thrust bearing facing away from the crankshaft. Install the balancer by turning the flanged nut
* The maximum recommended input torque is 150ft lbs. The threads should be lubricated prior to each use
Ciri-ciri:
* Alat profesional untuk penggantian pengimbang.
* Galas terbina dalam menjadikan pengimbang mengganti pekerjaan dengan mudah dan tanpa kerosakan.
* Plat penarik 4 slot ditambah 9 penyesuai berulir yang sesuai dengan pengimbang pada kebanyakan enjin.
* Untuk penyingkiran dengan mudah kebanyakan penyeimbang harmonik dan takal penggerak yang dipasang di atas engkol.
* Menampilkan bebibir 2/3 arah berpusat pada galas dan pelbagai bolt metrik dan pecahan dan penyesuai untuk memberikan liputan yang luas
* Skru penekan berdiameter 3/4 ''tugas berat diikat secara dalaman agar sesuai dengan lapan penyesuai untuk memasang pengimbang harmonik
*There are options for walk-in purchases.
*We always try to keep the item in stock all the time.
=========================================
Contact Information:
Balakong:
017-3691406,[email protected]
017-3691038,[email protected]
603-89623888
603-89617328
Setapak:
016-6616801(whatsapp)
016-6613186(whatsapp), [email protected]
012-9380198, [email protected]
603-40219399
Gombak:
603-40318686(whatsapp)
016-7166820, [email protected]
016-6616081, [email protected]
Titiwangsa:
012-9380198, [email protected]
603-40319292
Kajang:
016-6613186(whatsapp)
016-2338830, [email protected]
Knight Auto Sdn Bhd (Since 1999)(476359-M)
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================
Malaysia
