[ V-TECH ] VT-230 Vital Nails Construction Adhesive Sealant 300ml

Descriptions

VT-230 Vital Nails is a one-component construction adhesive sealant formulated to bond on a variety of common construction materials. It has a strong initial grab, superior adhesion, and does not slump on vertical surfaces.

Benefits

• Mirror and polystyrene-safe
• Strong initial grab
• Non-drip paste
• Excellent adhesion on most substrates

Specifications

• SVHC compliant
• Mirror and polystyrene-safe
• Strong initial grab
• Non-drip paste
• Excellent adhesion on most substrates
• Can be extruded even at low temperatures

Applications

• Ideal for bonding most construction materials: wood, particle board, metal, concrete, fiber reinforced cement board, ceramics, bricks, and flooring panels.
• Can be used on polystyrene and mirror.

Application Directions

1. Surfaces must be clean, dry and free of dirt, grease, oil or water.

2. For a neat finish, apply masking tape and remove it before construction adhesive skins over.

3. Cut tip off and puncture the internal foil seal with nozzle. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.

4. Two-way contact (Lighter substrate bonding): Apply adhesive onto substrate to be bonded, press firmly, and pull apart. Allow to tack-off for 10 to 30 seconds and press firmly together again. Contact areas should be tapped with a rubber mallet to ensure intimate contact.

5. One-way method (Heavier substrate bonding): Apply adhesive onto substrate to be bonded, press firmly, and securely fasten them together (clamp, nail, screw, etc.). Retain fastening for a minimum of 24 hours.

6. Any wet or partially wet adhesive can be removed with a piece of cloth. Dried adhesive is best removed with scraper or by sanding.

Limitations

Not suitable for outdoor use. Do not use for overhead mirror installations