HEAVY DUTY BATTERY BOOSTER CABLE / JUMP START CABLE FOR CAR AND LORRY
舣 BRAND NEW 駮
舣 BEST QUALITY PRODUCTS
舣 PRICE IS FOR 1 SET
舣 SET INCLUDE LEFT AND RIGHT (BLACK AND RED)
舣 SUITABLE FIT FOR
Car
Van
Lori 3-10ton
Luxury Car
Suv
Truck
High Quality Product for Daily Industrial Use
Insulated Reinforced Handle for Protection, Comfort and Anti-Slip Gripping
Serrated Clamping to Maximize Gripping Power and Contact Area, Colour Coded for Easier Identification
Premium Copper Wires for High Current Pass Through, Easier Starting and Durable Moulded Vinyl Coated for Safe Handling
2AWG / 35mm^2 Diameter 300Amp x 5 Meters Length for Sufficient Use between Two Cars
300 Amps Rated for Luxury Car, SUV, Lori 3-10ton, Vans and Trucks Fast Starting
Designed for High Productive Usage for Workshop, Charging and Emergencies
Simple and Reliable Operation, Compact During Storage and Suitable for Portable Use
Simple and Reliable Operation, Compact During Storage and Suitable for Portable Use
3 Meters Length for Sufficient Use between two vehicles
Premium Copper Wires for High Current Pass Through, Easier Starting and Durable Moulded Vinyl Coated for Safe Handling
Suitable for High Productive Usage for Workshop, Charging and Emergencies
Steps to JUMP START a vehicle using cable:
1. Make sure both cars are turned off.
2. Connect one end of the red (positive) jumper cable to the positive terminal on the stalled battery.
3. Connect the other red (positive) cable to the positive terminal of the good battery.
4. Connect one end of the black (negative) jumper cable to the negative terminal of the good battery.
5. Connect the other black (negative) cable to a clean, unpainted metal surface under the disabled car’s hood.
6. Start the car that’s doing the jumping; run for 2 to 3 minutes before starting dead car.
7. Remove cables in reverse order.
8. Keep jumped car running for at least 30 minutes to give battery sufficient time to recharge. SPM
Malaysia
