FLUKE - Vibration meter 805: 马来西亚的首选 Carlssoon Technologies Sdn Bhd

详情

FLUKE - Vibration meter
Brand : Fluke
Model : 805

Features :

Measures overall vibration (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement units of measurement for a wide variety of machines
Provides Crest Factor+ technology for reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Compares vibration levels with ISO-10816 severity scales
Allows you to view trending in Microsoft® Excel using pre-built templates
Features colored lighting system (green, red) and on-screen comments to indicate how much pressure needs to be applied to take measurements
Measures temperature with Spot IR Sensor to increase diagnostic capabilities
Holds and saves up to 3,500 measurements in on-board memory
Provides external accelerometer support for hard to reach locations
Allows you to export data via USB
Provides audio output for listening to bearing tones directly
Features built-in flashlight for viewing measurement locations in dark areas
Provides large high-resolution display for easy navigation and viewing

Specifications :

Vibration Meter
Low frequency range (overall measurement)	10 Hz to 1,000 Hz
High frequency range (CF+ measurement)	4,000 Hz to 20,000 Hz
Severity levels	Good, satisfactory, unsatisfactory, unacceptable
Vibration limit	50 g peak (100 g peak-peak)
A/D converter	16-bit
Signal to noise ratio	80 dB
Sampling rate	Low frequency	20,000 Hz
	High frequency	80,000 Hz
Real time clock backup	Coin battery
Sensor
Sensitivity	100 mV g ±10%
Measurement range	0.01 g to 50 g
Low frequency range (overall measurement)	10 Hz to 1,000 Hz
High frequency range	4,000 Hz to 20,000 Hz
Resolution	0.01 g
Accuracy	At 100 Hz ±5% of measured value
Amplitude Units
Acceleration	g, m/sec²
Velocity	in/sec, mm/sec
Displacement	mils, mm
Infrared Thermometer (Temperature Measurement)
Range	-20°C to 200°C (-4°F to 392°F)
Accuracy	±2°C (4°F)
Focal length	Fixed, at ~3.8 cm (1.5 in)