Loctite 515: 马来西亚的首选 Aerochem Industries Sdn Bhd

详情

Features and Benefits

This anaerobic-curing flange sealant for rigid machined metal flanges fills gaps up to 0.25 mm (0.01'') and typically provides a 30-minute fixture time.

LOCTITE® 515 is a form-in-place anaerobic-curing flange sealant that cures when confined in the absence of air between close fitting metal surfaces. It seals close fitting joints between rigid metal faces and flanges and will flex with minor flange movements. It provides resistance to low pressures immediately after assembly of flanges, and is typically used as a form-in-place gasket for pumps, thermostats, compressors, transmission housing,s and axle covers. The product is fluorescent under UV light, allowing visual inspection of the bead.

For machined metal components
Forms a perfect seal
Gap fill up to 0.25 mm (0.01'')
Form-in-place sealant
Fluorescent under UV for quality control

Technical Information

Application method	Dispense system, Manual
Applications	Rigid assembly gasketing, Sealing
Chemical basis / base	Methacrylate
Color	Purple
Cure type	Anaerobic cure
Fixture time	30.0 min.
Gap fill	0.25 mm
Key characteristics	Fluorescent, For machined, rigid flanges, Strength: medium strength, Thixotropic
Lab shear strength	6.0 N/mm²
Number of components	1 part
Physical form	Gel
Recommended for use with	Metal: aluminum, Metal: steel
Storage temperature	8.0 - 21.0 °C
Viscosity, Brookfield - HBT, @ 25.0 °C Spindle TB, speed 0.5 rpm, Helipath	700000.0 - 1700000.0 mPa·s (cP)
Viscosity, Brookfield - HBT, @ 25.0 °C Spindle TB, speed 5.0 rpm, Helipath	150000.0 - 375000.0 mPa·s (cP)

更多 Aerochem Industries Sdn Bhd 相关资料