We are your one-stop laboratory partner in Malaysia. NATTEST LAB SDN BHD provides comprehensive solutions to assist our valued customers in the selection of the right system that fits their specific needs.
Drop a line and get tailored solutions for your needs. Our merchants will contact you shortly.
https://www.nationaltestlab.com/category/structural-monitoring/
https://www.nationaltestlab.com/category/structural-investigation/
https://www.nationaltestlab.com/category/non-destructive-test/
https://www.nationaltestlab.com/category/geotechnical-investigation
https://www.nationaltestlab.com/category/project-laboratory-rental
https://www.nationaltestlab.com/mechanical-mini-lab
Mechanical Mini Lab rental solution is intended to help projects that require extensive mechanical testing without the requirement for a full-scale permanent laboratory.
https://www.nationaltestlab.com/soil-mini-lab
The Soil Mini Lab is a tiny but fully functioning solution for geotechnical testing on the project site.
https://www.nationaltestlab.com/mega-project-site-lab
For large-scale infrastructure and industrial projects, Mega Project Site Lab provides a full-service, multi-disciplinary laboratory that is located right on site.
https://www.nationaltestlab.com/concrete-mini-lab
Concrete Mini Lab is intended to provide dependable, on-site quality control for concrete components and mixtures.
https://www.nationaltestlab.com/infrastructure-project-site-lab
Infrastructure Project Site Lab is designed for medium to large-scale public and private sector infrastructure projects
https://www.nationaltestlab.com/charpy-impact-test
Assesses the impact toughness of metallic materials by measuring the energy absorbed during fracture under sudden loading, especially at varying temperatures.
https://www.nationaltestlab.com/pc-strand-tensile-test
Determines the ultimate tensile strength and elongation of prestressed concrete (PC) strands, crucial for ensuring performance in tensioned structural applications.
https://www.nationaltestlab.com/mechanical-coupler-tensile-test
Tests the tensile strength of mechanical rebar couplers to ensure the joined bars meet structural load requirements and maintain continuity in reinforced concrete.
https://www.nationaltestlab.com/hardness-testing
Measures a material’s resistance to surface deformation using methods like Brinell, Rockwell, or Vickers, commonly applied to metals and alloys for quality control.
https://www.nationaltestlab.com/brc-weld-strength-test
Verifies the strength of welded joints in prefabricated BRC (British Reinforcement Concrete) mesh panels, ensuring weld integrity and performance under load.
https://www.nationaltestlab.com/rebar-bend-test
Assesses the ductility and flexibility of rebar by bending it to a specified angle without cracking or breaking, ensuring its suitability for structural use.
https://www.nationaltestlab.com/rebar-tensile-test
Determines the tensile strength, yield strength, and elongation properties of reinforcing bars to verify compliance with structural specifications and material standards.
https://www.nationaltestlab.com/rebar-rebend-test
Evaluates the rebar's ability to withstand bending and rebending, simulating fabrication and construction stresses to confirm material ductility and durability.
https://www.nationaltestlab.com/noise-monitoring
Measures ambient and construction-related noise levels using sound level meters to assess compliance with regulatory limits and minimize environmental disturbance.
https://www.nationaltestlab.com/vibration-monitoring-test
Tracks ground or structural vibrations generated by construction, traffic, or machinery using geophones or accelerometers, ensuring compliance with safety and environmental standards.
https://www.nationaltestlab.com/extensometer-test
Measures displacement and deformation between fixed points in soil or rock to monitor ground settlement, tunnel convergence, or structural expansion and contraction.
https://www.nationaltestlab.com/piezometer-test-eg-pneumatic-standpipe-types
Measures pore water pressure within soil or rock masses, aiding in the assessment of slope stability, seepage control, and the performance of earth structures like dams and embankments.
https://www.nationaltestlab.com/inclinometer-test-slope-or-elevation-angle-measurement
Monitors lateral ground movement and slope stability by measuring changes in inclination within a borehole, critical for landslide assessment and excavation safety.
https://www.nationaltestlab.com/crack-monitoring-test-tiltmeter
Utilizes tiltmeters to measure angular changes across structural cracks or joints, enabling the detection of movement trends and structural instability in buildings or infrastructure.
https://www.nationaltestlab.com/settlement-monitoring-gsm-bsm
Tracks vertical ground or structural movement over time using Geodetic Settlement Markers (GSM) and Building Settlement Markers (BSM), providing early warning of differential settlement or subsidence.
https://www.nationaltestlab.com/pile-dynamic-test-pda-test
Evaluates pile capacity, integrity, and driving stresses during installation or re-strike using sensors that measure force and velocity, allowing real-time analysis and verification.
https://www.nationaltestlab.com/pile-integrity-test-pit
A low-strain, non-destructive test that assesses the integrity and continuity of piles by analyzing the response of the pile head to a light impact, identifying potential defects or changes in cross-section
https://www.nationaltestlab.com/pile-cross-hole-sonic-logging-test
A non-destructive integrity test for bored piles that uses ultrasonic pulses between access tubes to detect internal flaws such as voids, cracks, or segregation in the concrete.
https://www.nationaltestlab.com/static-pile-load-test
A direct method of assessing the axial load-bearing capacity of a pile by applying a controlled static load and measuring settlement, providing essential validation of pile design.
https://www.nationaltestlab.com/bidirectional-pile-load-test
A full-scale load test that applies axial loads in two directions using embedded hydraulic jacks to evaluate the load-carrying capacity of deep foundations without requiring large reaction systems.
https://www.nationaltestlab.com/cement-grouting
Injects cement-based slurry into cracks, voids, or weak soils to improve strength, seal leakages, and enhance ground or structural stability.
https://www.nationaltestlab.com/structure-jacketing
Improves load capacity and confinement of columns or beams by encasing them in reinforced concrete or steel jackets, often used in seismic retrofitting.
https://www.nationaltestlab.com/design-calculation-for-strengthening
Involves detailed structural analysis and engineering calculations to develop safe and effective strengthening strategies for existing buildings or elements.
https://www.nationaltestlab.com/fibre-wrap-concrete-frp-wrapping
Uses fiber-reinforced polymer (FRP) composites to wrap structural members, enhancing their strength, ductility, and seismic resistance without significant added weight.
https://www.nationaltestlab.com/structural-concrete-repair
Restores damaged or deteriorated concrete elements using patching, replacement, or epoxy injection to regain structural performance and durability.
https://www.nationaltestlab.com/internal-skimming
Provides a smooth and even finish on interior walls and ceilings using thin layers of plaster or skim coat, ideal for painting and decoration.
https://www.nationaltestlab.com/foundation-waterproofing
Protects structures against water ingress by applying waterproofing membranes, coatings, or injection systems to foundation walls and below-grade elements.
https://www.nationaltestlab.com/render-and-plastering
Applies cement-based or gypsum coatings on internal and external surfaces to provide smooth finishes, protect walls, and improve aesthetics.
https://www.nationaltestlab.com/crack-repair
Seals structural and non-structural cracks in concrete or masonry using injection methods or flexible sealants to restore strength and prevent further deterioration.
https://www.nationaltestlab.com/strengthening
Enhances the load-carrying capacity and durability of existing structures using advanced techniques such as jacketing, FRP wrapping, and steel plate bonding.
https://www.nationaltestlab.com/foundation-wall-and-beam-realignment
Restores structural integrity by correcting displaced or misaligned foundation walls and beams through controlled lifting, shoring, and repositioning techniques.
https://www.nationaltestlab.com/pu-grouting-and-compaction-grouting
PU grouting stops water ingress by injecting polyurethane into cracks, while compaction grouting densifies loose soils beneath foundations to improve load-bearing capacity.
https://www.nationaltestlab.com/dye-penetrant-test
Detects surface-breaking defects such as cracks or porosity in metals and non-porous materials using a visible or fluorescent dye and developer process.
https://www.nationaltestlab.com/welding-test-radiographic-testing-rt
Evaluates the internal quality of welded joints by using X-rays or gamma rays to reveal internal flaws like porosity, cracks, or inclusions
https://www.nationaltestlab.com/magnetic-particle-inspection-testing
Detects surface and near-surface cracks in ferromagnetic materials using magnetic fields and iron particles to visualize defect locations.
https://www.nationaltestlab.com/concrete-carbonation-test
Determines the depth of carbonation in concrete using phenolphthalein indicator, which is critical for assessing corrosion risk to embedded steel.
https://www.nationaltestlab.com/full-scale-load-test
Applies actual service or design loads to structural elements or systems to evaluate load-bearing performance and validate design assumptions.
https://www.nationaltestlab.com/halfcell-potential-rebar-corrosion-test
Assesses the likelihood of corrosion in embedded steel reinforcement by measuring electrical potential differences on the concrete surface.
