Laser Particle Counter: Top Choice in Johor Bahru (JB), Malaysia, Mount Austin JCompressor Services Sdn Bhd

Description

S 130 laser particle counter

S 130 is a new generation laser particle counter optimized for applications in compressed air or compressed gases. With quality in mind and with the knowledge of customers needs this instrument is designed for continuous operation 24 hours, 7 days a week. Depending on the selected model there is sensitivity available from 0.1 m up to 5.0 m. S 130 can fulfill the requirements stipulated in the compressed air standard ISO 8573-4. The measurement values represent the particle counts per ft³, l or m³ or alternatively in g/m³. Settings can be done through the integrated display, an external CS-iTEC display or through the service software.

Application

Medical air
Pharmaceuticals
Breathable air
Marine air
Food and beverage
Medical engineering
High speed trains
Semiconductor fabs
Conveyance of hygroscopic food
High tech processes
Electronics industry

Product features

Easy connection to compressed air through 6 mm quick-connector
Can be used as portable as well as stationary instrument
Particle sizes from 0.1 … 5.0 μm (depending on model)
Optional display
Measures according to ISO 8573-4
Output signals:
– RS-485 / Modbus/RTU
– SDI (CS-iTEC internal signal)
– Relay switch (NO)
Connectable to CS-iTEC displays and data loggers as well as third parties displays and control units

Technical data

Technical data S 130
Measuring medium	Compressed air and gases free of corrosive, aggressive, caustic and flammable constituents
Models: S 130-A S 130-B S 130-C S 130-D S 131	2 channels: 0.3, 0.5 m 4 channels: 0.2, 0.3, 0.5 and 1.0 m 4 channels: 0.5, 1.0, 3.0 and 5.0 m 2 channels: 0.5 and 5.0 m 4 channels: 0.1, 0.5, 1.0 and 5.0 m
Counting efficiency	50% (per JIS)
System pressure	0.2 … 0.8 MPa
Flow rate	S 130: 2.83 l/min S 131: 28.3 l/min
Sampling rate	One sample per minute
Calibration	NIST traceable
Measuring unit	Particle counts per ft³, l or m³ , selectable Concentration in μg/m³
Gas connection	6 mm quick connect
Electrical connection	M12 connector
Gas temperature	0 … 40 ºC (at inlet)
Ambient conditions	10 … 40 ºC
Transport temperature	-30 … +70 °C
Output signal	RS-485, Modbus/RTU SDI (internal CS-iTEC signal) 4 … 20 mA Alarm relay
Power supply	24 VDC, 5 W
Application	Downstream of filters wherever upstream drying and filtration is applied
Casing / dimensions	PC, Al alloy, 271 X 205 X 91 mm
Classification	IP65
EMC	According to IEC 61326-1
Settings	Various sensor settings can be performed through the related service software
Weight	1900 g

More detail about JCompressor Services Sdn Bhd