Clamp Meter
MODEL 2009R
MODEL 2009R

 

MODEL 2009R

MOBICON-REMOTE ELECTRONIC SDN BHD flag
Category: Clamp Meter Available
For more information, visit our official website at mobicon.com.my
Visit Official Site Contact Us
Description

• CAT IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits.

• Accurate True-RMS reading of AC current or voltage with distorted waveform.
• Can measure AC and DC currents up to 2000A.
• Output terminal for connection to recorders.
 
AC A 400.0/2000A
±1.3%rdg±3dgt (0 - 400.0A, 150 - 1700A) (45 - 66Hz)
±2.0%rdg±5dgt (0 - 400.0A, 150 - 1700A) (20Hz - 1kHz)
±2.3%rdg±3dgt (1701 - 2000A) (45 - 66Hz)
DC A 400.0/2000A±1.3%rdg±2dgt
AC V 40.00/400.0/750V
±1.0%rdg±3dgt (45 - 66Hz)
±1.5%rdg±5dgt (20Hz - 1kHz)
DC V 40.00/400.0/1000V±1.0%rdg±2dgt
Ω 400.0/4000Ω ±1.5%rdg±2dgt
(Electronic protection (no fuse) up to 600V)
Continuity buzzer Buzzer sounds below 20Ω
Hz 10.0 - 4000Hz±1.5%rdg±5dgt
(Input sensitivityCurrent: more than 40AVoltage: more than 10V)
Conductor size Ø55mm max.
Output Recorder :
DC400mV against AC/DC400.0A
DC200mV against AC/DC2000A
Applicable standards IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1
Power source R6 (1.5V) × 2
Dimensions 250(L) × 105(W) × 49(D)mm
Weight Approx. 540g (including batteries)
Included Accessories 7107A (Test leads), 8201 (Output plug), 9094 (Carrying case)
R6 (AA) (1.5V) × 2, Instruction Manual
Optional Accessories 7256 (Output cord)

Product Catalogue

More detail about MOBICON-REMOTE ELECTRONIC SDN BHD
MOBICON-REMOTE ELECTRONIC SDN BHD
MOBICON-REMOTE ELECTRONIC SDN BHD Electronic Components Selangor, Penang, Test & Measurement Instruments Supply Kuala Lumpur (KL), Automation Parts Supplier Malaysia ~ MOBICON-REMOTE ELECTRONIC SDN BHD
Contact Us flagMalaysia