TYPICAL PROPERTIES |
COPPER ANTI-SEIZE |
Consistency |
NLGI No. 2 |
Penetration (1/10mm at 25°C, 60x) ASTM D217 |
275 |
Penetration change (10 000 x) |
35 |
Dropping point |
None |
Timken OK load, kg (ASTM D2509) |
>25 |
Copper corrosion test (ASTM D130) |
1b |
Base oil viscosity at 40°C, cSt (Brookfield) |
100 |
Max operating temperature as thread/anti-seize lubricant |
1 100°C |
Key metallic component |
Copper |
Colour |
Golden |
Exceeds requirements of MIL-A-907E (US Military Spec) |
Yes |
Average torque to loosen threaded connection after being subject to: |
|
565°C |
70Nm |
1 100°C |
200Nm |
Co-efficient of friction at 200N |
0.140 |
Compliance with latest First World Environmental Legislation |
No |
Resistance to contact with Ammonia |
None |
Resistance to Electrolytic Galvanic Corrosion |
None |
Suitable for use on Austenitic/Stainless Steels |
No |
High load, slow-moving lubricating properties |
Excellent |
Protection against corrosion of battery terminals |
Excellent |
Apply to back of disc pads to eliminate squeal |
Yes |
Contents of aerosol packs |
400 ml |
Packing in tubes |
100g |
Other packs (500g, 5kg, 15kg, 50kg & 180kg) |
Yes |