The VX-200XI module is designed to be used in conjunction with the VX-2000 System Manager, and comes with control input terminals, low-cut and high-cut filters, and gain controls.
Specifications:
| Power Source | Supplied from VX-2000 |
| Current Consumption | Under 30 mA |
| Input Sensitivity (Rated Output -20 dB) |
MIC: -70 to -42.5 dB* (adjustable) LINE: -20 to +7.5 dB* (adjustable) MIC or LINE selectable by the built-in switch |
| Low Cut Filter (100 Hz) | 9 to 15 dB attenuation (adjustable) |
| High Cut Filter (10 kHz) | 8 to 14 dB attenuation (adjustable) |
| Distortion | Under 0.5% |
| Frequency Response | 50 - 20,000 Hz |
| Phantom Power | 15 V (open), 6 V (current consumption: 3.3 mA) |
| Control Input |
No-voltage make contact, open voltage: 17 V DC, short-circuit current: Under 5 mA |
| Input Connector |
RJ45 female connector Twisted-pair straight cable (TIA/EIA-568A standard) |
| Finish | Panel: Aluminum, hairline |
| Dimensions | 35 (W) × 78 (H) × 88 (D) mm |
| Weight | 70 g |
| Accessory | Mounting screw……2 |
| Option | Isolation transformer: IT-450 |
| Applicable Model | VX-2000 |
Malaysia
