Fuel Injector Cleaner (Petrol) - Spanjaard Malaysia

A high quality petrol injector cleaner that removes gum and varnish deposits from the injection and fuel system while you drive.

 

Applications
- To clean dirty petrol injectors and fuel systems.
- Recommended for sluggish engines due to sticking injectors.

- Contains no phosphorous, zinc, magnesium or other heavy metal components that would induce harmful chemical reactions to the catalytic convertor exhaust systems used in motor vehicles.

- The additives used are approved by the Californian Air Resources Board for use in low exhaust emission vehicles.
 

Application Instruction
a) To keep injectors clean: 

1. Pour contents into petrol tank and repeat every 1 000km.

b) Workshop use:

1. Remove vacuum hose from inlet manifold pressure regulator, insert hose into  FUEL INJECTOR CLEANER (PETROL) bottle.

2. Start engine and run at fast idle until bottle is empty (excessive white smoke will temporarily come out of exhaust).

3. Replace vacuum hose and run engine until exhaust smoke has cleared.


Typical Properties

	FUEL INJECTOR CLEANER
Appearance	Brown Liquid
Density, g/ml	0.75
Viscosity @ 25ºC, cSt	16

Available Packing
375ml bottle



Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei