As bezel diameter is small (minimum diameter = 36mm), these are suitable to measure at the narrow setting space of production lines and many measuring points by being mounted to the machine
Lifting Lever and Bezel Clamp can be mounted optionally.
Dimension Table
| Model | A | B | C | D | E | F | G | H | I | J |
| TM-35 | 27.4 | 41.3 | 39 | 36.5 | 10 | 14.5 | 19 | 5 | 6.2 | 11.8 |
| TM-35-01 | 32.5 | 46 | 39 | 36.5 | 10 | 14.5 | 19 | 5 | 6.2 | 16.5 |
| TM-35-03 | 27.4 | 46 | 39 | 36.5 | 15 | 14.5 | 19 | 5 | 6.2 | 11.5 |
| TM-35-04 | 27.4 | 58 | 39 | 36.5 | 26 | 14.5 | 19 | 5 | 6.2 | 12.5 |
| TM-35-02D | 32.5 | 46 | 39 | 36.5 | 10 | 16.5 | 19 | 5 | 6.2 | 16.5 |
Unit:mm
| Model | Graduation (mm) | Measuring Range (mm) | Repeatability (μm) | Indication Error (μm) | Hysteresis (μm) | Standard Contact Point | Measuring Force (N) | Weight (g) | |||
| 1/10 Revolution | 1/2 Revolution | 1 Revolution | Total Range | ||||||||
| TM-35 | 0.01 | 5 | 5 | 8 | 12 | 14 | 18 | 4 | ZS-014 | 1.3 or less | 72 |
| TM-35-01 | 0.1 | 10 | 20 | 20 | -- | -- | 50 | 15 | ZS-014 | 1.5 or less | 72 |
| TM-35-03 | 0.01 | 5 | 3 | 8 | 12 | 14 | 18 | 4 | ZS-014 | 1.3 or less | 72 |
| TM-35-04 | 0.01 | 5 | 3 | 8 | 12 | 14 | 18 | 4 | ZS-014 | 1.3 or less | 75 |
| TM-35-02D | 0.01 | 10 | 3 | 9 | 12 | 14 | 20 | 5 | ZS-014 | 1.6 or less | 75 |
*In case flat back is required, please add suffix “f” to the end of model number. (example=TM-35f)
More detail about MSP Metrology (M) Sdn Bhd
Malaysia
