AIR COOLED MIG WELDING TORCH
MIG - 450A, 15.8kW, Mixed Gas (80/20) @ 100% Duty Cycle, .040"(1.0mm) 3/32"(2.4mm) Wires
MIG - 450A, 15.8kW, Mixed Gas (80/20) @ 100% Duty Cycle, .040"(1.0mm) 3/32"(2.4mm) Wires

 

MIG - 450A, 15.8kW, Mixed Gas (80/20) @ 100% Duty Cycle, .040"(1.0mm) 3/32"(2.4mm) Wires

AIM Tools & Machineries Sdn Bhd flag
Category: AIR COOLED MIG WELDING TORCH Available
Purchasable on official site
For more information, visit our official website at aim-tools.com
Visit Official Site Contact Us
Description

XP8

450A, 15.8kW, Mixed Gas (80/20) @ 100% Duty Cycle, .040''(1.0mm) – 3/32''(2.4mm) Wires.
Model:
XP450W-40E- Welding Torch Package c/w Euro Fitting x 4m

Consumables:
A - Nozzles B - Contact Tips C - Diffussers
XP3002-13 - Tapered Nozzle 1/2''/13mm
XP3002-16 - Conical Nozzle 5/8''/16mm
XP3002-16L - Conical Nozzle 5/8''/16mm Extended
XP3002-19 - Cylindrical Nozzle 3/4''/19mm
XP3002-19L - Cylindrical Nozzle 3/4''/19mm Extended		 XP3003-12 - Contact Tip .045''/1.2mm M10 CuCrZr
XP3003-12A - Contact Tip .045''/1.2mm M10 CuCrZr Al
XP3003-16 - Contact Tip 1/16''/1.6mm M10 CuCrZr		 XP3004B - Diffuser-Moulded c/w Ceramic Insert-M10 Head
XP3004C - Diffuser-Ceramic-M10 Head
 
D – Head Assembly E – Liners
XP3505 - Head Assembly-M10 Tips XP3524-12-40 Steel Liner .040-.045''/1.0-1.2mm x 4m/13ft
XP3524-16-40 Steel Liner .045-.063''/1.2-1.6mm x 4m/13ftt
XP3524PC-16-40 Poly-Copper Liner .045-.063''/1.2-1.6mm x 4m/13ft
Table to show the affect on XP8 performance when using alternate gas types
  Mixed Gas (80/20) Mixed Gas (95/5) 100% CO² Max. Wire Size
Model Amps kW Amps kW Amps kW Inch/mm
XP200A-40E 200 6.0 200 6.0 200 7.8 .045”/1.2mm
XP300A-40E 300 8.7 280 8.4 375 11.7 .045”/1.2mm
XP400A-40E 400 12.0 300 9.0 480 17.2 3/32”/2.4mm
XP450W-40E 450 15.8 450 15.8 450 15.8 3/32”/2.4mm
Superior Ergonomics
The neck and handle geometries have been designed to give a neutral wrist position when welding to reduce the risk of RSI (Repetitive Strain Injury).

The handle design is the most compact available and the handle grips are designed to prevent the torch slipping in the welders hand allowing him to relax his grip, further reducing strain.

The knuckle joint and tapered support improve freedom of movement and give progressive support to the power cable allowing it to form a smooth curve into the handle and maximise wire feed.

More detail about AIM Tools & Machineries Sdn Bhd
AIM Tools & Machineries Sdn Bhd
AIM Tools & Machineries Sdn Bhd Power Tools Supplier Selangor, Welding Machines Supply Kuala Lumpur (KL), Safety Supplies Malaysia ~ AIM Tools & Machineries Sdn Bhd
Contact Us flagMalaysia