Description
EBARA SUBMERSIBLE PUMP 50DVS5.75～
The DVS model pump has a unique semi-vortex construction of EBARA's own design. This pump is as efficient as a conventional non-clog pump which uses the centrifugal force of eddy to pump liquids. As you can see, any foreign matter sucked into the pump must pass the impeller, which can result in trouble caused by clinging grass and clogged stones.
With the vortex pump, foreign matter is expelled by the force of eddy which is
formed in the wide space between the impeller and the suction cover. There is less likelihood of clogging.
APPLICATIONS:
-Ideal for waste water application
-containing soft or fibrous solids
-Industrial waste water drainage
-Septic effluent
-Miscellaneous drainage
FEATURES:
- No clogging with semi-vortex construction
- Semi-vortex impeller offers non-clog operation and allows pumping of foreign particle
- Built-in motor protection
- Double mechanical seal
- DVSA model permits automatic operation
- Parallel alternate operation possible with DVSA and DVSJ models
SPECIFICATIONS:
Scope Discharge: 50 - 80 mm
Motor Power: 0.4 - 3.7 kW (3phase)
Performance Capacity: 0.04 - 0.9 m/min
Head: 3 - 24 m.
Liquid Type Water containing foreign matter
Maximum temperature: 40 C (Manual and A Type)32 C (J' Type)
Max. solids refer to table below Submergence
Maximum: 8m (2.2 - 3.7 kW) 4m (0.4 - 1.5 kW)
Minimum Refer to low water level (L.W.L.) in dimensions.
Construction Impeller Semi - Vortex
Mechanical Seal: Oil lubricated, single spring
double mechanical seal
Materials Casing: Cast Iron Impeller/ Cast Iron
Shaft/ 403 Stainless Steel
Motor Frame: Cast Iron
Fasteners: 304 Stainless Steel
Mechanical Seal Upper Faces: Carbon / Ceramic
Lower Faces: Silicon Carbide / Silicon Carbide
Lubricating Oil: Turbine Oil VG32 (SAE10W/20W)
Motor Type: Air filled dry submersible, IP68,
Class E insulation (1& 0.4, 0.75 kW & 0.4 kW), Class F insulation (others)
Nominal Speed: 2900 rpm
Applicable Voltages: 220/230/240
Volts: 1 phase /50 Hz380/400/415 volts 3 phase 50Hz
Starting DOL Protection In built overload
protection Bearings Pre lubricated sealed ball
bearings Cable Length: 6m (0.4 to 1.5 kW)10m (2.2 to 3.7 kW)
Model: 50DVS5.75 (1.0HP/750watts/415v/50Hz)
(MADE IN ITALY🇮🇹)
PRICE: RM2850.00 (1 Year Warranty) Ex-STOCK!
*WE DO PROVIDE PUMP INSTALLATION AS WELL, INSTALLATION FEE WILL BE DEPENDING ON YOUR AREA & HOUSE STRUCTURE, ROUTE OF PIPING, MATERIALS
& ELECTRIC POWER POINTS TO QUOTE. NEED MORE DETAILS? PLEASE DO NOT HESITATE TO CONTACT US NOW.
More detail about Vinzhoo Marketing Trading
.jpg)
.jpg)
Malaysia
