INSTALLATION AND USE
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
They are easy to use and are economical,they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or sheltered from inclement weather.
MOTOR FEATURE
Insulation ClassB
Protection IP44
Thermal protector
Continuous service S1
Two-pole induction motor
Single-phase 220V/50Hz,60Hz on demand
Three-phase 380V/50Hz,60Hz on demand
OPERATING CONDITION
Suction lift up to 8m
Liquid temperature up to 60ºC
Ambient temperature up to 40ºC
COMPONENT CONSTRUCTION CHARACTERISTICS
PUMP BODY : Cast iron,with brass/AISI304 SS sheet insert on request(Anti-blocking)
PUMP SUPPORT : Cast iron,with brass/AISI304 SS sheet insert on request(Anti-blocking)
MOTOR HOUSING : Aluminum
IMPELLER : Brass
MOTOR SHAFT : Carbon steel,AISI304 SS on request
MECHANICAL SEAL : Ceramic/Graphite
BEARINGS : 6201 RZ/6201 RZ(0.5HP),6202 RZ/6202 RZ(0.75HP&1HP)
CERTIFICATIONS
| MODEL | INLET/OUTLET | POWER | Q | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | |
| m3/h | ||||||||||||
| Single phase | Inch | KW | HP | l/min | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 |
| PM-45 | 1''×1'' | 0.37 | 0.5 | H(m) | 35 | 30 | 25 | 20 | 15 | 10.5 | 6.5 | 3 |
