MEANWELL 150W CONSTANT POWER MODE LED DRIVER - XLG-150 SERIES - XLG-150-24
XLG-150-24
Features
Wide input range 100~305VAC (Class I)
Full power output at 70~100% constant power mode operation
Metal case with IP667, suitable for outdoor application
Surge protection with 6K V/4K V (10K V/6K V)
3 in 1 dimming function (Dim to off and Isolation design)
India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440VAC for 48 hours
Protection functions: OVP/SCP/OCP/OTP
Life time >50,000 hrs. and 5 years warranty
Applications
Skyscraper lighting
Street lighting
Floodlight lighting
Stage lighting
Fishing lighting
Horticulture lighting
Bay lighting
DMX power supple
Type HL for use in class I, Division 2
Description
XLG-150 series is a 150W LED AC/DC driver featuring the constant power mode. XLG-150 operates from 100~305VAC and offers models with different rated current ranging between 700mA and 12500mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG-150 series comply with the latest version of IEC61347/GB7000. 1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both luminaire system during installation.
SPECIFICATION
Model : XLG-150-24
Output
DC voltage : 24V
Constant current region : 16.8 ~ 24V
Rated current : 6.25A
Rated power : 150W
Ripple & noise (max) : 240mVp-p
Current adj. range : Adjustable for A-Type only (via the built-in potentiometer) / 3.2 ~ 6.25A
Voltage tolerance : ±2.0%
Line regulation : ±0.5%
Load regulation : ±1%
Setup, Rise time : 500ms, 100ms/230VAC, 1200ms, 100ms/115VAC
Hold up time : 10ms/ 230VAC 10ms/ 115VAC
Input
Voltage range : 100 ~ 305VAC 142 ~ 431VDC
Frequency range : 47 ~ 63Hz
Power factor : PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
Total harmonic distortion : THD< 10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
EFFICIENCY (Typ.) : 93%
AC current : 12V : 1.8A / 115VAC 1.0A / 230VAC 0.8A/277VAC
Inrush current : COLD START 50A(twidth=500μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
Max. No. of PSUs on 16A circuit breaker : 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
Leakage current : <0.75mA / 277VAC
Protection
Over current : 95 ~ 108% / Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
Short circuit : Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
Over voltage : 27 ~ 34V / Shut down output voltage, re-power on to recover
Over temperature : Hiccup mode, recovers automatically after fault condition is removed
Environment
Working temp. : Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Max. case temp. : Tcase=+90℃
Working humidity : 20 ~ 95% RH non-condensing
Storage temp. humidity : -40 ~ +85℃, 10 ~ 95% RH
Temp. coefficient : ±0.06%/℃ (0 ~ 60℃)
Vibration : 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
E S L Lighting (M) Sdn BhdLED Lighting Supplier Selangor, Lighting Shop Seri Kembangan, Kuala Lumpur (KL), Decorative Lighting Supplies Malaysia ~ E S L Lighting (M) Sdn Bhd