Rock Splitters
Darda Rock Splitters C20 V
Darda Rock Splitters C20 V

 3

Darda Rock Splitters C20 V

Kyusen Machinery & Construction Sdn Bhd flag
Category: Rock Splitters Available
Purchasable on official site
For more information, visit our official website at kyusenhycon.com
Visit Official Site Contact Us
Description


ROCK SPLITTERS
(C20V)


• Easy replacement of wear parts
• Rotatable and very maneuverable
• Automatic wedge lubrication
• Multiple mounting options
• Lowest power-to-weight ratio on the market
• Use even under water
 
 
MODEL C20V
   Dimension (LxWxH)                  1833 x 721 x 557 mm                 
   Weight 405 kg / 890 lb
CARRIERS
   Recommended carrier weight³ 5 - 7 t
HYDRAULIC CONNECTION
   Connection pressure, min. 17.5 MPa (175 bar)
   Connection pressure, max. 25 MPa (250 bar)
   Oil flow, min. - max. 25 - 100 l/min
   Rotary drive connection pressure, max.     25 MPa (250 bar)
   Rotary drive oil flow, max. 30 l/min
   Operating pressure 50 MPa (500 bar)
WEDGE SET
   Wedge set length N / L 640 / 840 mm
   Drillhole diameter 76 mm
   Drillhole depth N / L, min. 750 / 950 mm
   Splitting distance N / L 22 / 25 mm
   Theoretical splitting force N / L 1500 / 1800 t
CONSUMABLES
Darda Special Lubricant
 

1. Vertical – vertical operation
Connected to carrier via side mounting plate. Rock Splitter connected to guide rail by chain.
Endlessly rotatable through hydraulic rotary drive,
enabling precise setting of splitting direction and splitting course. Only one machine operator required.
 
2. 360° rotary drive
Easy positioning and setting of the splitting direction and the course of the splitting.
 
3. Internal pressure booster
Full splitting force independent of the input pressure of the carrier thus always guaranteed.
 
4. Integrated, automatic wedge lubrication system
Lubrication system and shut-off device guarantee lifetime and cost savings.
Factory setting allows 80 – 100 splits per filling. Lubricant quantity adjustable.
Ready for use again in the shortest possible time due to cartridge filling via rechargeable battery refill pump.
 
5. Length splitting insert selectable
Two possible lengths can be selected depending on the type of rock and rock composition.
 
6. Specially developed hardening process
Hard metal layer of the counter wedges enables the transmission
of the very high forces and provides long-lasting protection against corrosion, seizure and wear.
 

More detail about Kyusen Machinery & Construction Sdn Bhd
Kyusen Machinery & Construction Sdn Bhd
Kyusen Machinery & Construction Sdn Bhd Construction Machinery Rental Selangor, Air Compressor Supplier Kuala Lumpur (KL), Generator Supply Malaysia ~ Kyusen Machinery & Construction Sdn Bhd
Contact Us flagMalaysia