A Solvent Free Single Component Elastomeric Liquid
Obaproof WP-200HD is a solvent free single component elastomeric liquid applied waterproofing putty membrane designed to cure to a flexible seamless wave membrane.
Coverage:
On roofs and terraces: at least 1.5kg/m? in two or more coats, depending
on the substrate..
On vertical side walls: at least 1kg/m² applied in two coats.
Note: Obaproof WP-200HD must be applied in minimum of two coats.
Surface Preparation:
Clean the dusty surfaced, grime, oil etc. Apply Obaproof CM-70Owp priming coat with nap roller or airless spray. Apply neat topcoats of Obaproof WP-200HD. Install fibre reinforce for better performance.
Advantage:
• Waterbased
• Low voC
• Applicable on expose area
• High elongation
• Weather proof
• Waterproof
• Anti hair line crack
• Good bonding strength
• Seamless
Application area:
• RC flat roof
• Car porch roof
• Bathroom
• Aircon ledge
• Balcony & yard
• External wall
• Metal roof & gutter
Expose area with slope
Application tools:
• Brush
• Roller
• High pressure single hose spray machine.
Note:
• To apply the Obaproof WP-200HD as expose type waterproofing system, a lay to fall RC or cement screed without water ponding & an additional layer of fiberglass net or fiberglass mesh reinforcement will maximize the performance of the material.
• To avoid blistering of the coating, the first coat application must be of thin coating and allowed to dry for at least 4 hours before the second coat can be applied.
