Insulation Meter PCE-IT 200

Insulation Meter PCE-IT 200

Category: Installation Meter Available
For more information, visit our official website at redmarkindustry.com

Description

Insulation meter with additional functions / Automatic detection of AC and DC / Timer / LCD color display / Buzzer and light alarm / 10 MΩ internal resistance test

Our compact insulation meter is perfect for measuring the insulation resistance of electrical appliances and household appliances. With its ability to measure insulation resistance, AC voltage, low resistance, PI (polarization index) and DAR (dielectric absorption), it is a versatile and reliable tool for many application scenarios. With test voltages of 100 V, 250 V, 500 V and 1000 V, insulation resistances up to 5.5 GΩ can be measured, allowing for accurate analysis and evaluation of insulation quality. The insulation meter not only provides the ability to measure direct current (DC) in the measurement range from 30 V to 600 V and alternating voltage (AC), but also detects resistance in the range of 0 Ω to 999 Ω with high accuracy to ensure good diagnosis of electrical systems.

The automatic AC and DC detection as well as the automatic discharge guarantee user-friendly operation and maximum safety during the measurement process. In addition, the insulation meter has a high-voltage alarm and an alarm when limit values are exceeded to inform the operator of possible risks. The insulation meter is powered by 6 x AA batteries and also has the option of an external power supply of 9V DC.Then device complies with the standards: CAT III 600 V, CAT I 2500 V and IEC 6010-1, and is supplied with approx. 80 cm long test leads in a device bag.


Highlight

- Measurement functions: HOLD, PI (polarization index), DAR (absorption ratio)
- Automatic detection of AC and DC
- Automatic unloading
- High voltage display
- Alarm when limit values are exceeded
- Overload: AC 720 V / 10 seconds
- Powered by 6 x 1.5V AA batteries
- External power supply 9V DC possible
 

Specification

DC Voltage DC  
Measuring range 30 V ... 600 V
Resolution 1 V
Accuracy ±2% v.Mw. ±3 digits
   
AC Voltage AC  
Measuring range 30 V ... 600 V
Resolution 1V
Accuracy ±2% v.Mw. ±3 digits
Overload AC 720 V / 10 seconds
   
Insulation resistance  
Test voltage DC 100 V
Measuring range 0 GΩ ... 1.5 GΩ
Resolution 0.01 GΩ
Accuracy ±5% v.Mw. ±3 digits (over 100 kΩ)
   
Insulation resistance  
Test voltage DC 250 V
Measuring range 0 GΩ ... 5.5 GΩ
Resolution 0.01 GΩ
Accuracy ±5% v.Mw. ±3 digits (over 100 kΩ)
   
Insulation resistance  
Test voltage DC 500 V
Measuring range 0 GΩ ... 5.5 GΩ
Resolution 0.01 GΩ
Accuracy ±5% v.Mw. ±3 digits (over 100 kΩ)
   
Insulation resistance  
Test voltage DC 1000 V
Measuring range 0 GΩ ... 5.5 GΩ
Resolution 0.01 GΩ
Accuracy ±5% v.Mw. ±3 digits (over 100 kΩ)
   
Resistance  
Measuring range 0 Ω ... 999 Ω
Resolution 0,1 Ω
Accuracy ±(2% v.Mw +3 digits)
   
General technical data  
Measurement Functions HOLD, PI, DAR
Display Type LC color display
Measurement Rate 2 Hz
Standard(s) IEC 6010-1
Life 12 h
Safety standard CAT III 600 V, CAT I 2500 V
Alarm   optical, acoustic
Language English
Protection class (device) IP20
Power supply DC9V
Weight 689 g
Dimensions (L x W x H) 110 x 176 x 77 mm
Service conditions 0 ... 40 °C , 0 ... 85 % RH
Storage -20 ... 60 °C , 0 ... 90 % RH
Battery/Battery 6x 1.5 V AA battery, alkaline manganese
Capacity 3000 mAh

Scope of delivery

1 x Insulation Meter PCE-IT 200
6 x 1.5V AA batteries
1 x Test Leads
1 x Equipment Bag
1 x Instruction Manual
 

More detail about Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd Testing Instruments Kuala Lumpur (KL), Industrial Supplies Selangor, Measuring Equipment Supplier Malaysia, Penang ~ Redmark Industry Sdn Bhd
Contact Us flagMalaysia