HIGH QUALITY PERFORMANCEFOR 2 / 3 / 4 SERIES:
• Major castings are manufactured from high quality Meehanite cast iron, completely annealed and stress relieved for deformation free performance.
• The overarm is ruggedly constructed and exhibits exceptional stability when performing heavy cutting.
• Square slideways on Y, Z-axis (for 4V series) way surfaces are hardened and precision ground assuring maximum rigidity and maintaining high accuracy in heavy cutting.
• Table slideways, and top and bottom surfaces are tempered and hardened.
• T-slots on table are also precision ground to upgrade accuracy on reference planes.
• X, Y-axis slideways are coated with Turcite-B for smooth traverse and wear-resistance.
• X, Y-axis feed screws are hard chrome plated for increasing wear-resistance capability and service life.
• The major cast iron of FC-30 and FCD-45 is high tensil material (MEEHANITE), it is annealed for stress releaving, featuring anti-wearness and deformation free.
• Automatic lubrication system provides lubrication to X, Y, Z-axis slideways and feed screws. Lubrication frequency and oil flow are adjustable. (Optional)
• Power feed units for X, Y-axis are available upon request (optional).
SPECIFICATIONS
4IV Series
Inverter variable speed head
1270 x 254 mm table
3HP frequency inverted spindle motor
Table
Table Size - 1270 x 254 or 1370 x 254 mm
T-slot (W x No. x Dist.) - 16 x 3 x 63 mm
Travel
Longitudinal Travel (X axis) - 776 mm
Cross Travel (Y axis) - 400 mm
Knee Travel - 406 mm
Ram Travel - 480 mm
Spindle
Spindle Speeds
- 8 Steps 80-2720 rpm
- 60-4200 / 0-4200
Spindle Taper - NST 30 or R8
Quill Travel - 127 mm
Quill Feed Rate - 0.04 / 0.08 / 0.15 mm/rev
Spindle Motor - 3HP
Quill Diameter - Ø86
Head Tilt - 45°(Head swivel 90°)
Spindle Nose to Top of Table - 40-446 mm
Spindle Center to Column - 200-680 mm
Electric
Coolant Pump - 1/8HP - 2P
Dimensions
Machine - 1750 x 1550 x 2200 mm
Packing - 1500 x 1650 x 1980 mm
Net Weight - 1350 kgs
Malaysia
