Medium Voltage Substations Screw Clamps

Mod. PATCPF-MPU

Earthing and short-circuit equipment for medium voltage substations. The main aim for its installation is operator’s protection against an accidental commissioning or possible voltage return during repair operations. The MPU clamp is fixed on bare cylindrical conductors, flat bars, bending bus-bars or fixing points by screw tightening. According to IEC 61230 standard.

• Composed of: 
• 3 MPU aluminium alloy clamps with screw tighten and Bayonet fixing for cylindrical conductors with diameter between 4 and 30mm, flat bars max. 45mm bending bus-bars max. 4mm and fixing points between 20 and 25mm.
• 3 copper cables with PVC insulation of 25/35/50mm² section (depending on model) and 0,75m long.
• 1 copper cable with PVC insulation of 25/35/50mm² section (depending on model) and 2m long.
• 1 rubber-insulated trifurcating connector.
• 1 1,5 m telescopic pole with three sections.
• 1 insulating grip for the earthing clamp.
• 1 plastic case to store and transport the equipment.