Description
Active Leak Repair Kit™ is an easy-to-install compression seal system designed for active leaks up to 75 psi. It consists of a compression strap – suitable for operations handling water, harsh chemicals and high heat – combined with a resin fiberglass outer wrap that hardens around it, securing the strap in place and protecting it from mechanical damage.
Installation
 |
1. Secure the leak with QuickStrap™ Starting opposite the leak, apply QuickStrap™ tightly around the pipe, layer over layer. Then, secure the end with tape. |
 |
2. Prepare the Pipe Surface Mark and abrade the surface to provide an anchor pattern. Solvent wipe the surface and allow the solvent to flash off. |
 |
3. Apply Pipe Wrap® and Topcoat Remove Pipe Wrap® from the foil pouch and immerse in water to activate the resin. Apply provided Pipe Wrap® using the cigar wrap method. A topcoat may be applied after two hours. |
