EC Cylinder is you can quickly setup ELECYLINDER just by entering data. You can also operate it with ON / OFF signals, like a solenoid valve.
No time-consuming programming is necessary.
Enter the movement conditions.
Air cylinders adjust velocity by adjusting the air flow rate using flow valves. Fine adjustment of velocity, acceleration and deceleration is not available.
With the ELECYLINDER, AVD can be entered individually in percentages to apply adjustments.
Troubleshooting can be performed using the teaching pendant.
Device stoppage causes and countermeasures are displayed.
In nearly all cases, just replace the motor or controller circuit board yourself and the unit will recover.
Air cylinders cannot operate at high velocity due to the impact at stroke ends which occurs when excess velocity is applied.
The ELECYLINDER can start and stop smoothly at high velocity, reducing cycle time.
Instead of an impact mechanism, the ELECYLINDER incorporates a ball screw and ball circulating type built-in linear guide to achieve a long service life.
Based on calculation using the conditions below, the lifespan of the ELECYLINDER is five times longer than that of air cylinders.
The difference in the rate of power consumption for the ELECYLINDER and air cylinders depends on the operational frequency. The higher the operational frequency, the more effective the energy-saving becomes.
Based on tests conducted by IAI, the ELECYLINDER's power consumption under the following conditions is 1/6 that of air cylinders.
Please contact us for South East Asia Market, Malaysia, Vietnam, Indonesia, Thailand, Philippines, Singapore, Brunei, Laos, Myanmar and Australia for more information.
