Pilot Tube Flow: Pinakamahusay na Pilihan sa Johor Bahru (JB), Malaysia, Mount Austin JCompressor Services Sdn Bhd

Deskripsyon

CS-iTEC flow sensor S 430

S 430 is based on the pitot tube principle to measure flow. Properly installed (refer to instruction manual for details) the sensor can measure in wet and dirty gases as occurring, for example, at the discharge of a compressor.

The sensor features long term stability , wide turn-down ratio and good temperature stability. It can be used in compressed air and non-corrosive gases.

Through a 1/2” G-type ball valve the sensor can be inserted into the pipe under pressure.

Various output signals allow the sensor to be connected to CS-iTEC displays and/or third party displays and PLCs.

html5: Video file not found

Application

S 430 measures:
– Standard flow and consumption
– Actual velocity
– Pressure
– Temperature

Product features

Flow and consumption measurement in wet air or high mass flow / velocity applications
Measurement at compressor outlet possible
Tube diameters of 1’’ to 10’’. Other diameters on request
Insertion type, easy installation under pressure through ball valve possible
High temperature applications up to 200 °C
No mechanical wear parts
All parts which are in contact with flow medium are made of stainless steel

Technical data

Flow range	Refer to Instruction Manual
Pressure range	0 … 1.6 MPa
Temperature range	-40 … +200 ºC
Accuracy	Flow: 0.5 % F.S. Pressure: 0.5 % F.S. Temperature: 0.5 °C
Pipe diameters	DN 25 (1”) up DN 250 (10″)
Reference conditions	Programmable, default P =1000 hPa, T = 20 °C
Medium	Wet and dry air and non-corrosive gases
Output signals	SDI (CS-iTEC specific) 4 … 20 mA and Pulse (optional) Modbus/RTU (optional) MBUS (optional)
Medium temp.	-40 °C … +200 ºC
Ambient temp.	-20 °C … +60 ºC
Operating pressure	0 … 1.6 MPa
Power supply	24 VDC, 150 mA
Display option	2.4” color graphics display with keypad
Process connection	1/2” G type

Tingnan ang karagdagang mga detalye tungkol sa JCompressor Services Sdn Bhd