Imada Digital Force Gauge (ZTA/ZTS Series)

Features

ZTA Series

High Functionality Model Digital Force Gauge

High functionality type digital force gauge has capacity of 1000N and is equipped with additional functions to ZTS series, such as input/output of displacement and data saving to USB. Next series digital force gauges with firmware Ver.5 or later offers improved measurement stability with less noise, and optional functions and software can be downloaded from the dedicated website (IMADA-connected.com). Some functions require connection to separately-sold products.

Electro Luminescent EL Display

The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.

 

USB Software Capabilities

Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.

 

Specifications

• High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
• Manages data via USB connection or saves continuous data to USB flash drive directly without PC
• Reduces risk of misreading values with easy-to-read high luminance organic EL display
• Improves efficiency of testing using the equipped I/O functions for combining with external devices, and enables foce vs. displacement testing*FA version test stand and optional cable are required
• Enables complex measurement such as material characteristic evaluation with optional software Force Recorder Professional available for real-time graphing of force vs. time/displacement *FA version test stand and optional cable are required

*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 The battery is more consumed when connected to USB flash drive or a linear scale.
*5 Not always available for Mitutoyo digimatic products.
*6 Some linear scales could not be available even if they meet the mentioned specifications.
*7 Weight is slightly different according to range.
*8 USB flash drive is not included.

Video

ZTS Series

 
Digital force gauge ZTS series is functional yet user-friendly model with 2N to 1000N capacity to perform the push pull gauge testing presented by MSP Metrology Sdn Bhd from Imada Japan

Features

ZTS Series

Standard Model Digital Force Gauge

Standard type digital force gauge has capacity of 1000N and is easy-to-operate and functional, with 2000Hz high-speed sampling for accurate peak measurement and smooth curve when graphing data. The included software enables data management via PC, and graphing software for detailed data analysis. Several external output methods are available for connection to various devices. Next Series digital force gauges with firmware Ver.5 or later has improved measurement stability with less noise, and optional functions and software can be downloaded from the dedicated website (IMADA-connected.com). Some functions require connection to separately-sold products.

Electro Luminescent EL Display

The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.

 

USB Software Capabilities

Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.

 

Specifications

• High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
• Manages data via USB connection or saves continuous data to USB flash drive directly without PC
• Reduces risk of misreading values with easy-to-read high luminance organic EL display
• Improves efficiency of testing using the equipped I/O functions for combining with external devices, and enables foce vs. displacement testing*FA version test stand and optional cable are required
• Enables complex measurement such as material characteristic evaluation with optional software Force Recorder Professional available for real-time graphing of force vs. time/displacement *FA version test stand and optional cable are required

*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Not always available for Mitutoyo digimatic products.
*4 Weight is slightly different according to range.

 

Video