Manual Micro Vickers Hardness Tester MMT series for Micro Vickers Hardness Testing by MSP Metrology (M) Sdn Bhd from Matsuzawa Japan
Realize 0.01μm measurement at general magnification of 200x – 1,000x.
Possible to measure with accurate numerical value about a small indentation.
By wide test load range of 9 level(type A) and 12 levels(type B), testing of 1-2000gf can be done.
By a new design, testing range of specimen height 120mm and specimen depth 160mm was secured
.png)
The turret which mounted with two indenter and four objective lens following conventional stable loading mechanism.
Visibility and operativity improve by color LCD. Equipped with the assist function that can identify the most suitable measurement condition
Clear specimen surface image magnified on LCD monitor is displayed. Because the measurement knob is placed in the measurement panel, you can significantly reduce the fatigue of working long hours
| ITEM | MMT-X7 | MMT-X3 | MMT-X1 | |
| Test Force | Standard Type A | 49.03 98.07 245.2 490.3 980.7 1961 2942 4903 9807 mN | ||
| 5 10 25 50 100 200 300 500 1000 kgf | ||||
| Standard Type B | 9.807 29.42 49.03 98.07 245.2 490.3 980.7 1961 2942 4903 9807 19614 mN | |||
| 1 3 5 10 25 50 100 200 300 500 1000 2000 kgf | ||||
| Loading Mechanism | Automatic Loading and Releasing Method | |||
| Indenter Approach Speed | 50µm/sec | |||
| Dwell Time | 5 ~ 99 sec | 5 ~ 30 sec | ||
| Indenter | Standard: 1 (HV), Option: 2 (HV, HK) | |||
| Objective Lens | Standard: 2 (40x, 10x ∴in case of AMT-PS/FS series: 40x, 50x), Option: Max. 4 (5x ~ 100x) | |||
| Eyepiece Lens | Standard 10x, Option 15x | |||
| Total Magnification | Standard (400x, 100x) Corresponding 50x ~ 1000x | |||
| Measuring Microscope (total 400x) | Max. Measuring Length | 250µm | ||
| Min. Scale | 0.01µm (200x~ 1000x) | 0.5µm | ||
| Min. Measuring Unit | 0.01µm (200x ~ 1000x) | 0.1µm | ||
| Measuring Type | Electronic | Mechanical | ||
| Data Output | Centronics (Dot printer output) | – | ||
| RS232C (Output for PC) Possible to change to printer output | ||||
| Light Source | LED Light Source | |||
| Turret | Auto | Manual | ||
| LCD Touch Panel | Color LCD touch panel | – | ||
| Testing Mode | 6 kinds of HV, HK, HBS, KC, Xbar, Cylindrical Correction | – | ||
| Data Memory | 999 data memory | |||
| Hardness Conversion | Possible in compliance with SAE (J-417B), ASTM (E-140) | |||
| OK/NG Criteria | Judging to the result by setting Max. and Min. | – | ||
| Statistical Calculation | Max. value, Min. value, dispersion (R), mean value, converted value | – | ||
| Accuracy | According to JIS B7725 and ASTM E-384 | |||
| Max. Specimen Height | 120mm | |||
| Max. Specimen Depth | 160mm | |||
| Dimensions and Weight | Main body only W250 x D520 x H530mm, 35kg | |||
| Photo Booth | Can be installed in the body tube in the upper part of the main body at any time | |||
| Power Supply | Single Phase AC100 ~ 240V 50/60Hz available for export models | |||
After the equipment is installed with probe, it can be used to measure the following parameters:
4-ring 8-division LED Surface Illumination
LED Parallel Contour Illumination
Zoom Lens
Video Capture Card
CCD Camera
Calibration Glass Stage
Data Integration Box
Software Dongle
Workbench
Computer System
Linear Scale
AV Cable
