Sensor technology
elobau sensors are contactless, wear and maintenance free, as well as extremely reliable. Our electronic sensors are based on the Hall, MEMS or magnetoresistive principle. In addition to tilt, angle and proximity sensors, our product line includes proximity switches based on reed-contact technology (also for potentially explosive areas), steel-proximity switches, vane switches and plunger switches.
Thanks to our range of standard products, we can quickly and cost-effectively provide customer-specific solutions.
The sensors from elobau offer:
Very long service life through contactless technology
Protection class up to IP69K
Temperature range -40 °C to +150 °C
Large sensing distances and offset tolerances
Extremely high resolution
Output signals: analogue, digital, single-channel and redundant as well as
with direct bus connection via CANopen or SAE J1939
Cable or plug connection on housing
Rugged and compact housing designs in various materials
Simple, time-saving mounting
Ultrasonic sensors
Ultrasonic sensors
Ultrasonic sensors
Measuring angles and pitch
Tilt sensors
Whether on the platform of a lifting hoist or the fork of a lift truck, the mercury-free N3/N4 tilt sensors from elobau are ideal even in difficult installation conditions.
Special characteristics of the elobau tilt sensors:
Monitoring of up to two axes
Zero-point calibration via IR remote control
Measurement range and up to four switching points can be freely combined
Switch-on and switch-off delay
Selectable vibration filter and signal delay
High repeat accuracy, low temperature drift
Mercury-free
Tilt sensor or inclinometer N3, single-axis
Tilt sensor N3
single axis
horizontal / vertical
Tilt sensor or inclinometer N4, dual-axis
Tilt sensor N4
dual axis
horizontal / vertical
Tilt sensor N5 with CAN-Bus interface, Inclinometer N5 up to 360° angle range
Tilt sensor N5
CAN-Bus interface
measurement up to 360°
Angle sensors
The angle sensors are suitable for detecting rotary motions from 20° to 359°. elobau angle sensors are based on the contactless Hall measurement principle; this is extremely reliable and ensures a long service life.
Special characteristics of the elobau angle sensors:
Analogue angle measurement of up to 360°
Select between ball or plain bearing
Optionally with actuation lever
Angle sensors 20-360°
Angle sensor 424D - 360°
Angle sensor
424D
360°
optional 2 outputs
Angle sensor 424C 360°
CAN angle sensor
424C.360
360°
Angle sensors 30-120°
Angle sensor 424A…A.
Angle sensor
424A...A...
ball or plain bearing
Redundant angle sensor 424R available with plain or ball bearing.
Angle sensor
424R…
redundant
ball or plain bearing
Axial angle sensor 424Z is optionally available with redundant output signal
Angle sensor
424Z…
axial
Position detection
The elobau product line for position detection includes magnetic and electronic proximity switches in cylindrical and rectangular designs. Steel proximity switches, vane switches and plunger switches as well as cylinder switches for pneumatic cylinders complete the portfolio.
Proximity switches (rectangular)
Proximity switches (cylindrical)
Pneumatic cylinder switches
Vane switches
Plunger switches
Steel proximity switches
Position detection for potentially explosive gas and dust atmospheres
In its extensive product line, elobau offers solutions for applications in potentially explosive gas and dust atmospheres. The proximity switches are designed in accordance with the corresponding standards and directives making them suitable for use in the chemical and pharmaceutical industry and in oil- and gas-processing systems, such as painting lines.
All sensors are approved in accordance with the ATEX directive 2014/34/EU, certificate number BVS 03 ATEX E 126 X
All parts except for part 610 0... are available in category 1G, 1/2G, 2G, 1D and 2D. Part 610 0... is not available in category 1/2G. All parts are available in both the intrinsically safe as well as in the non-intrinsically safe version. Observe the Ex-relevant aspects in the operating instructions.
Ex switch 6200.0..0 in PA housing
ATEX switch
6200.0..0
M18 x 55 mm
PA housing
Ex switch 6500....0 in stainless steel housing
ATEX switch
6500....0
ø 16 x 115 mm
VA housing
Ex switch 6503.0..0..0 in stainless steel housing
ATEX switch
6503.0..0
ø 16 x 115 mm
VA housing
tube gland
Explosion-proof switch 6503..01 in stainless steel housing
ATEX switch
6503..01
ø 16 x 115mm
VA housing
tube gland
protection tube
Explosion-proof switch in zinc die-cast housing
ATEX switch
6100…
97.5 x 25 x 19.3 mm
zinc die-cast housing
Accessories
Angular display 36024.....
