Deskripsyon
Targeted design
Internal water cooling circulaing syatem without external cooling tower.
Effectively avoid hard water quolity and easy scaling in individual places.
- High effciency circulating water pump;Large flow design,improve cooling efficiency.
- Stainless steel circulating water case;Super large volume,without external piping.
- High efficiency cooling fan.Improve cooling efficiency ratio.
Fend against the severe cold
Design for adapt to severe cold area,Optional installation of antifreeze in sub-zero climate.
Avoid to the cylinder or water circulation system frost crack caused by external cooling tower.
- Special equip antifreeze, adapt the working condition below freezing point in northern winter.can normal operate not below 25°C
High efficiency and energy-conservation
Whole series standard equip rare earth permanent magnet frequency conversion motor,
According to the fluctuation of gas to adjust power output.
- Permanent magnet screw and engine integrated,No coupling and other transmission links,higher efficiency.
- The efficiency of motor is 5% higher than that of ordinary motor,more energy conservation.
- Realize the configuration function of frequency,and wide range of frequency adjust.
Technical parameters of bull series series permanent magnet variable frequency screw oil free booster compressor
Model |
Volume flow
(Nm³/min) |
Exhaust pressure
(Mpa) |
Installed power
(KW) |
Shaft power
(KW) |
Crankshaft Speed
(rpm) |
KG |
Circulating water (t/h)
|
Air Outlet Size |
Cooling Water Outlet Size |
Dimensions (L x W x H) |
LGJBF-2.4/35T(PM) |
2.4 |
3.5 |
29.5 |
28 |
520 |
1140 |
17 |
45 |
1'' |
1600x1200x1500 |
LGJF-4.0/35T(PM) |
4.0 |
3.5 |
45 |
43 |
530 |
1780 |
38 |
45 |
1'' |
2200x1500x1850 |
LGJF-6.0/35TS(PM) |
6.0 |
3.5 |
67 |
60 |
530 |
2200 |
38 |
45 |
1'' |
2200x1500x1850 |
Permanent magnet variable frequency is optional for 35T model.
Reference conditions : temperature : 20°c suction pressure : 1 bar (abs) relative humidity : 0%
Standard constraints : height : 1000 m standard equipment : highest temperature 40°c standard options :
The Company's products continue to improve, to retain right of design change.Parameters change, without prior notice.
Tingnan ang karagdagang mga detalye tungkol sa DMG KOMPRESSOREN (SEA) SDN BHD