PosiTector bodies accept all PosiTector probes easily converting from a coating thickness gage to
a surface profile gage, dew point meter, soluble salt tester, hardness or ultrasonic thickness gage.
PosiTector 6000 (magnetic and eddy current coating thickness)
PosiTector 200 (ultrasonic coating thickness)
PosiTector SPG (surface profile)
PosiTector RTR or PosiTector RTR 3D (replica tape reader)
PosiTector DPM (environmental/dew point meter)
PosiTector IRT (infrared thermometer)
PosiTector UTG (ultrasonic wall thickness)
PosiTector SST (soluble salt testing)
PosiTector SHD (Shore hardness durometer)
PosiTector BHI (Barcol hardness impressor)
Certified Coated Metal Plates & Certified Polystyrene Blocks
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
-
Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
-
Ideal for use in the calibration lab, in the field or on the factory floor
-
Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
-
Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
-
Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
-
Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.
Specifications & Ordering Guide
Certified Coated Metal Plates
Select the Standard that most closely matches the measuring range of your gage.
.jpg)
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
Plate Diameter: 38 mm (1.5') Measurement Diameter: 25 mm (1')
Certified Polystyrene Blocks
Select the Standard that most closely matches the measuring range of your gage.
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
P1-P7 Blocks: 38 x 70 mm (1.5' x 2.75') P8 Blocks: 76 x 76 mm (3.0' x 3.0')
