Deskripsyon
Please contact [email protected] for more information.
Programmable & Single Channel DC Power Supplies
-
Constant Power Output for 5 Times Multi-range(V&I) Operation
-
Natural Convection Cooling Design (Fanless Structure)
-
Preset Memory Function
-
Output ON/OFF Delay Function
-
CV, CC Priority Mode
-
Adjustable Slew Rate For Voltage and Current
-
Bleeder Circuit Control
-
Output Voltage Rating:20V / 36V / 60V
-
Output Power:360W / 720W
-
Low Ripple and Noise (0.5mVrms/ 10mArms)
-
Fast transition recovery time(100us)
-
Voltage Rating:6V/12.5V/20V/40V/60V/100V/150V/300V/400V/600V
-
Output Power Rating: 1200W~1560W
-
C.V / C.C Priority
-
Adjustable voltage/current rise and fall time
-
Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W
-
Constant Power Output for Multiple Range (V&I) Operation
-
CV/CC Priority; Particularly Suitable for the Battery and LED Industry
-
Adjustable Slew Rate
-
Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)
-
3.5 Inch TFT LCD Display
-
Constant Voltage and Constant Current Operation
-
Built-in DVM Measurement Function
-
Output Voltage Rating : 80V/800V
-
Output Power Rating : 400W~800W
-
Constant Power Output for Multi-Range(V&I)Operation
-
Series and Parallel Operation(2 Units in Series or 4 Units in
-
parallel Maximum)
-
LCD display and menu-typed functionality selection
-
Support front panel output terminals (Max.30A) and rear panel output terminals (Rating current output)
-
Bleeder circuit control
-
I/V Control function
-
Digitized Programmable Interface
-
High Resolution 10mV, 1mA
-
High Stability, Low Drift
-
Over-Voltage, Over-Current, Over Temperature Protection
-
Single Output Dual Range Max. 200W
-
High resolution: 1mV/1mA
-
0.01% load/line regulation, 350uVrms ripple
-
Auto step runing with timer setting and 100 Sets memory
-
Wide input voltage range and high power factor (P.F)
-
high efficiency and high power density
-
Constant voltage and constant current operation
-
Over voltage over current and over temperature protection
-
LCD display
-
Output on/off control
-
3-step fan speed control
-
Voltage/current/power settings
-
Key lock to avoid operation error
-
OVL / OCL /OPL /OTP protection
-
CV, CC priority start function.
-
Four levels of current measurement resolution (min. 0.1μA) / two levels of voltage measurement resolution (min. 0.1mV)
-
Power output ON/OFF delay function
-
Adjustable voltage and current slew rate
Programmable & Multiple Channel DC Power Supplies
-
4.3”TFT LCD Display
-
Supports Setting Value, Measurement Value and Output Waveform Display
-
Load Function (CC, CV, CR Mode)
-
Setting Resolution: 1mV / 0.1mA; Read Back Resolution: 0.1mV / 0.1mA
-
Dual Channel DC Power Output
-
PPH-1503D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A)
-
PPH-1506D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~3A)
-
PPH-1510D (CH1: 0~15V/0~3A or 0~9V/0~5A, 0~4.5V/0~10A
-
Easy operation with UP/DOWN key
-
High resolution: 10mV, 1mA
-
Over voltage protection, over current protection by software
-
50 Sets memory
-
Self test and software calibration
-
Easy operation with UP/DOWN key
-
High Resolution: 10mV, 1mA
-
Over voltage protection, over current protection by hardware
-
50 Sets memory
-
Self test and software calibration
-
Digitized programmable interface
-
high resolution 10mV, 1mA
-
192 x 128 LCD display, simultaneously
-
Over-voltage, over-current, over temperature protection
-
2/3/4 Independent Isolated Output
-
4 LED Display Sets: 3 digits after decimal point
-
Minimum Resolution :
-
1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)
-
4.3”TFT LCD Display
-
Setting resolution: 1mV / 0.1mA; read back resolution: 0.1mV / 0.1mA
-
Low ripple noise: ≦1mVrms/ ≦2mArms
-
Transient response time: ≦100µS
Non-Programmable & Single Channel DC Power Supplies
-
0.01% High Regulation
-
Constant Voltage and Constant Current Operation
-
Internal Select for Continuous or Dynamic Load
-
Low Ripple and Noise
-
0.01% High Regulation
-
Constant Voltage and Constant Current Operation
-
Internal Select for Continuous or Dynamic Load
-
Low Ripple and Noise
-
Light and Compact Design
-
0.01% High Regulation
-
Constant Voltage and Constant Current Operation
-
Remote Control for External Programmability
-
Dual Measurement Display
-
0.01 % High Regulation
-
Constant Voltage and Constant Current Operation
-
High Efficiency
-
High Power Density
-
1 Independent Isolated Output
-
4.3 Inch LCD Display
-
Setting & Read back Resolution 100mV / 10mA (*1)
-
Output ON/OFF
Non-Programmable & Multiple Channel DC Power Supplies
-
4 Independent Isolated Output
-
Four ''3 Digits'' LED Displays
-
0.01% Load and Line Regulation
-
Low Ripple and Noise
-
1 / 2 / 3 / 4 Independent Isolated Output
-
4.3 Inch LCD Display
-
Setting & Read back Resolution 100mV / 10mA (*1)
-
Output ON/OFF
-
Triple Output
-
Auto Tracking
-
Auto Series and Parallel Operation
-
Constant Voltage and Constant Current Operation
-
Three independent, isolated output
-
CH3 adjustable output : 0.1~5V/3A
-
High efficiency power conversion (up to 25% more than traditional power supply)
-
Remote output on/off control
Tingnan ang karagdagang mga detalye tungkol sa Hexo Industries (M) Sdn Bhd