High Speed Peeling Tester
This is 180 degree peel tester with capacity 20N or 50N. It peels film or adhesive tape at an angle of 180 degrees (maximum peeling speed: 1500mm/min) and measures its peeling strength and adhesive strength. Next Series with firmware version 5 or later offers improved measurement stability thanks to low noise, expandability through the addition of functions (firmware download) on the dedicated website (IMADA-Connected.com), and the convenience of downloading various software and instruction manuals.
Standards
Samples
Stickers, adhesive tape, screen protector film for smartphone, low-friction silicon rubber sheet, laminated package, adhesive tape for first-aid, double postcard (two attached postcards), magnetic tape, electrode’s line of solar cell, copper foil of circuit board, and more
Accurate Graphing
It captures rapid force change due to its high sampling rate (2000Hz) thus ensures high repeatability
One-click operation
Simply press the START button to start the test. It peels the sample to the set stroke (peel length)
Automatic Recording
Automatic recording, graphing and saving data when testing
Visual analysis
Overlays Max. 5 graphs to allow easy comparison and visual analysis. Automatically calculates Max/Min/Ave values of each graph and shows them in the same table
| Japan Model | IPTS-20N | IPTS-50N |
| US Model | IPTS-4 | IPTS-11 |
| Capacity | 20N | 50N |
| Resolution | 0.01N | |
| Accuracy | +/-0.2%F.S. +/-1digit | |
| Overload | Approx.150%F.S (It warns with light flashing and buzzer when the force is over 110% of capacity.) |
|
| Sampling rate | Max.2000 data / sec (2000Hz) | |
| Test speed | 120, 200, 300, 500, 1000, 1500mm/min (Switchable) | |
| Stroke (length) | Travel of load cell: Approx. 400mm (Peel length: Approx.200mm) | |
| Peel angle | 165°-180° (Height and angle are adjustable.) | |
| Max. sample width | Adhesion: 88mm (Grip: 20mm, Clamp: 50mm) | |
| Max. sample thickness | Grip: 3mm Clamp: 13mm |
|
| Safety device | Emergency stop button, Overload prevention (Valid only when the power is ON) (*1) |
|
| Power | AC100 to 240V free input (*2) | |
| Weight | Approx. 11kg | |
| Operating environment | Temperature: 0 to 40°C Humidity: 20 to 80%RH | |
| Accessories | Force Recorder Standard (graphing software), USB cable, Power cable, Film grip, Spacer block, Inspection certificate, Instruction manual |
|
*1 It does not guarantee complete protection against overload.
*2 Please specify the voltage when you order. (Accessory varies depending on voltage.)
| Data transferring speed | Max. 2000 data / sec (2000Hz) |
| Recording data point | Max. 7.2 million |
| Graph | Graph overlaying function, Capture function, Graph scaling, Statistics output, Point marking |
| Graph recording | Trigger function |
| Edit | Comment, Add notes, Borderline function |
| Output | Printing (A4, letter size), CSV, Word, Excel, PDF |
| OS | Windows 7/8/8.1/10 |
| Hardware | CPU: Pentium4 (1GHz or more) or more is recommended Memory: 2GB or more is recommended Hard disk (data storage area): 10GB or more is recommended |
| Plat form | NET Framework4.6 or later |
| Execute environment | Microsoft Internet Explorer 6 or later Windows installer 3.1 or later |
| Image size | Resolution 1024×768 pixel or more |
| Connection port | USB1.1, USB2.0 connecor * Operation in USB 3.0 has not been varified. |
* Some old versions of Excel show data up to 65,531 only
180° Peeling Tester
Peel Strength Tester has capacity of 5N and measures the peel strength of cover tapes of embossed carrier tapes that contain semiconductors and electronic components in accordance with JIS and other industrial standards. Next Series with firmware Ver. 5 or later offers improved measurement stability due to low noise, expandability with the ability to add functions on a dedicated website ((MADA-Connected.com), and the convenience of downloading various software and instruction manuals.
IPTS-5N is peeling tester with 5N capacity. It is specialized for peeling test of embossed carrier tape complying with IEC and JIS standard.
Standards
Accurate Graphing
It captures rapid force change due to its high sampling rate (2000Hz) thus ensures high repeatability
One-click operation
Simply press the START button to start the test. It peels the sample to the set stroke (peel length)
Automatic Recording
Automatic recording, graphing and saving data when testing
Visual analysis
Overlays Max. 5 graphs to allow easy comparison and visual analysis. Automatically calculates Max/Min/Ave values of each graph and shows them in the same table
| Japan Model | IPTS-5N |
| US Model | IPTS-1 |
| Capacity | 5N |
| Resolution | 0.001N |
| Accuracy | +/-0.2%F.S. +/-1digit |
| Overload | Approx.150% F.S (It warns with warning buzzer and light flashing when the force is over 110% of capacity.) |
| Sampling rate | Max.2000 data / sec (2000Hz) |
| Test speed | 120, 200, 300, 500, 1000, 1500mm/min (Switchable) |
| Stroke (length) | Travel of load cell: Approx. 400mm (Peel length: Approx.200mm) |
| Peel angle | 165°-180° (Height and angle are adjustable.) |
| Max. sample width | Adhesion: 88mm (Film clip: 40mm, Sample clip: 95mm) |
| Max. sample thickness | Cover film: 0.5mm |
| Safety device | Emergency stop button, Overload prevention (Valid only when the power is ON) (*1) |
| Power | AC100 to 240V free input (*2) |
| Weight | Approx. 11kg |
| Operating environment | Temperature: 0 to 40°C Humidity: 20 to 80%RH |
| Accessories | Force Recorder Standard (graphing software), USB cable, Power cable, Film clip, Inspection certificate, Instruction manual |
*1 It does not guarantee complete protection against overload.
*2 Please specify the voltage when you order. (Accessory varies depending on voltage.)
| Data transferring speed | Max. 2000 data / sec (2000Hz) |
| Recording data point | Max. 7.2 million |
| Graph | Graph overlaying function, Capture function, Graph scaling, Statistics output, Point marking |
| Graph recording | Trigger function |
| Edit | Comment, Add notes, Borderline function |
| Output | Printing (A4, letter size), CSV, Word, Excel, PDF |
| OS | Windows 7/8/8.1/10 |
| Hardware | CPU: Pentium4 (1GHz or more) or more is recommended Memory: 2GB or more is recommended Hard disk (data storage area): 10GB or more is recommended |
| Plat form | NET Framework4.6 or later |
| Execute environment | Microsoft Internet Explorer 6 or later Windows installer 3.1 or later |
| Image size | Resolution 1024×768 pixel or more |
| Connection port | USB1.1, USB2.0 connecor * Operation in USB 3.0 has not been varified. |
* Some old versions of Excel show data up to 65,531 only
