FMT-W40 Pull Tester | Alluris by Muser: Pinakamahusay na Pilihan sa Kuala Lumpur (KL), Malaysia, Selangor, Sunway Velocity Muser Apac Sdn Bhd

Deskripsyon

Alluris FMT-W40 Pull Tester

Features

For tensile testing of wire terminals according to IEC, DIN, EN, BS, UL, SAE, MIl and NASA standards
Compact and rugged bench top instrument with hardened scratch-resistant base plate
3 test modes selectable for destructive and non-destructive test, pull and break, pull and hold, pull hold and break *
Constant pull speed in 7 steps selectable between 10…200 mm/min *

Description

The motorized pull tester is a compact bench top instrument to measure the tensile strength of most common solder-free cable joints with end sleeves, pins, solder pins or similar wire terminal components.

Test samples are inserted into the receptacle adaptor, which has 12 different slot widths (from 0.5mm to 6.0mm), covering all the prevalent wire strengths and terminal types. More adaptors are available.

With the optional software the measurement data can be downloaded via the USB interface to MSExcel. It takes only a few minutes to prepare a complete test report with statistical summary as pdf-file (more details please check software FMT-W_Connect).

Technical Specifications

		Order No.
		FMT-W40C5	FMT-W40K1
Capacity F(nom)*	N	500	1000
Resolution**	N	0.5	1
Tolerance**	% F(nom)	0.5
Temperature coefficient	%/ K	0.02
Reproducibility***	%F	0
Repeatability*	%F	0.25
Hysteresis***	%F	0
Max. operating force*	% F(nom)	120 (autoreverse if exceeded)
Measurement error**	% F(nom)	1.0
Breaking force*	% F(nom)	150
Nominal deflection*	mm	0.15	0.25
Display	Type	LCD, 5 digits, 14mm high
Measuring principle		Force sensor with full-bridge strain gauge and high-speed μ-processor
Measuring rate	Hz (Peak)	~ 1.000
Memory		Statistics memory with display of the mean, maximum, minimum and standard deviation for 1000 measurements
Cable diameter	mm (slot width)	0.5 \| 0.8 \| 1.0 \| 1.3 \| 1.5 \| 2.0 \| 2.5 \| 3.0 \| 3.5 \| 4.0 \| 5.0 \| 6.0
	mm (clamping device)	0.1 – 6.0
Cross section	Range IEC 60352-2	0.05 - 4mm2 (AWG 10 - 30)	0.05 - 6mm2 (AWG 8 - 30)
	Range SAE AS7928 II	AWG 14 - 30	AWG 10 - 30
Min. cable length	mm	70
Pull speed	mm/min	10 \| 25 \| 37.5 \| 50 \| 100 \| 150 \| 200
Speed tolerance	%	+/- 2.0
Power supply	Type	24 VDC \| 3A
Interface	USB 2.0	Optional software FMT-W_Connect
Adm. temperature	Operation (°C)	0 - 30
	Stocking (°C)	-5 - 60
Weight	kg	14.5
Dimension (LxWxH)	mm	320 x 160 x 115
Material		Anodised aluminum, surface hardened steel, stainless steel V2A, polystyrene

*) according to VDI / VDE / DKD 2638 at 0.2 ... 1 x F (nom)
**) according to DIN 1319-1
***) due to design and application, no independent error contribution

Scope of Supply

Pull tester (desktop unit) complete with test adapter, motor-driven traction, USB interface, CD-ROM with software (without license), data cable and universal power supply. Operating instructions (DE, EN, FR, SP, IT) with CE conformity confirmation, DAkkS calibration certificate, software license, interchangeable adapter and carrying case must be ordered separately.

Downloads

Product Video

Tingnan ang karagdagang mga detalye tungkol sa Muser Apac Sdn Bhd