Deskripsyon
Alluris FMI-M10 Force Gauge
Features
-
Spring scale with Newton scale for easy tensile force measurement
-
Robust, anodized and abrasion-free aluminum tube with a long precision scale
-
Determination of peak values with towing ring
-
Optional pressure set for pressure force measurement
Description
In a mechanical force gauge, a spring is stretched by the applied force and the change in length (about 140mm at maximum force) is displayed on a precision scale in the SI dimension Newton. The main advantage of this measuring method is the simple application. With this measuring principle, peak values, e.g. determine of closing/opening forces or tensile tests can be made easily.
The peak value (max. pull) is displayed by means of a tow ring.
Attention! When choosing a mechanical force gauge, be aware that the sudden change of load, e.g. if the material to be tested breaks, does not exceed 40% of the maximum force value.
The optional push rod set extends the application possibilities.
Technical Specifications
|
|
Order No. |
|
FMI-M10A3 |
FMI-M10A6 |
FMI-M10B1 |
FMI-M10B2 |
FMI-M10B5 |
FMI-M10C1 |
FMI-M10C2 |
FMI-M10C5 |
|
Capacity F(nom)* |
N |
3 |
6 |
10 |
25 |
50 |
100 |
200 |
500 |
|
Resolution** |
N |
0.02 |
0.05 |
0.1 |
0.2 |
0.5 |
1 |
2 |
5 |
|
Tolerance** |
% F(nom) |
3 |
|
Temperature coefficient* |
%/ K |
0.05 |
|
Reproducibility* |
%F |
0.6 |
|
Repeatability* |
%F |
0.6 |
|
Hysteresis* |
%F |
1.5 |
|
Measuring principle |
Tension spring with direct scaling |
|
Nominal deflection* |
mm |
100 |
140 |
|
Application of force |
Bracket and tow hook |
|
Accessories |
Drag ring |
included |
|
Handle |
|
included |
|
Push rod (optional) |
FMT-918 |
FMT-917 |
|
Calibration Certificate |
ISO 9001 certified |
CAL-100B1Z |
|
|
ISO 17025 accredited |
|
CAL-210B5Z |
CAL-210K1Z |
*) according VDI/VDE/DKD 2638 at 0,2 ...1 x F(nom)
** ) according DIN 1319-1
Scope of Supply
-
Spring balance with draw hook and instruction manual in protective cover. Print set and calibration certificate optionally available.
-
Attention! When selecting the measuring range, please note that spring scales may be used up to a maximum of 40% of the nominal force range in the event of a tear or fracture test.
Downloads
Tingnan ang karagdagang mga detalye tungkol sa Muser Apac Sdn Bhd
