Wet Abrasion Scrub Tester

Paint often becomes soiled especially near doorways, windows, and in work and play areas. Coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means. The Wet Abrasion Scrub Tester can produce a repeatable, controlled condition to simulate everyday use or wear patterns.

BGD 526 Wet Abrasion Scrub Tester is the newest machine which is developed by Biuged . It can examine washability and related properties that affect the stain resistance of coatings. Detergent performance testing can also be determined in a reproducible manner.

It accords with standards such as ASTM D2486、ASTM D 3450、ASTM D 4213、ASTMD 4828、DIN EN 11330、EN ISO 11998 etc.

Feature：

◆ Running speed can be set to meet requirements of different standards.

◆ With four-digit counter, start the machine and it will automatically be stopped when reaching set times.

◆ Compatible with a variety of abrasion pads to comply with different standards requirements, such as ISO, ASTM, DIN etc..

◆ Quickly and easily to load and unload testing samples and replacing abrasion head.

◆ Can work normally under different voltage and frequency

◆ With stable and uniform running speed because of Push-rod design

◆ Features two brush holders for side by side testing

◆ Long service life with hard and durable design

◆ The whole machine body is made of anodized aluminum, having stable working status, repeatable test results, no exception even in the fastest speed of the stroke.

◆ With peristaltic pump design, control scrub medium flow accurately.

■ Stroke Length：300mm

■ Specification of brush：Nylon brush bristles in 5/4 pattern extending 19mm from block.

■ Weight of brush （including device holding brush）：454±10 g（ASTM D 2486）；135±1g（ISO 11998）

■ Frequency of travel ：5～95 times/min（adjustable）

■ Range of count： 0～9,999 times

■ Size of test plate： 430mm×150mm×0.03mm

■ Power of motor：25W

■ Power：110V～220V；50/60 Hz

■ Overall size： 590mm×570mm×320mm（L×W×H）

■ Net Weight：26 KG

■ Capacity of Water Container：1L

■ Ordering Information:  

BGD 526/1---Wet Abrasion Scrub Tester ( ASTM D 2486 )

BGD 526/2---Wet Abrasion Scrub Tester ( ISO 11998 )

BGD 526/3---Wet Abrasion Scrub Tester ( ASTM D 3450) 

BGD 526/4---Wet Abrasion Scrub Tester ( ASTM D 4213 )

BGD 526/5---Wet Abrasion Scrub Tester (ASTM D 4828 )

BGD 526/6---Wet Abrasion Scrub Tester (DIN 53778)

BGD 527---Wet Abrasion Scrub Tester (ASTM D 2486& ISO 11998)

■ Optional Accessories:  

BGD 1187---Abrasion Heads for ASTM D 3450（Sponge+ Weights, total weigh is 1,500g）

BGD 1188---Abrasion Heads for ASTM D 4213（Sponge+3M Scotch Brite handpads + Weights, total weigh is 470±

BGD 1189---Abrasion Heads for ASTM D 4828（Sponge+ Weights, total weigh is 1000±10g）

BGD 1191---Abrasion Heads for DIN 53778（Hog Bristle Brush+ Weights, total weigh is 250±10g）

BGD 1195---Abrasion Heads for ISO 11998（3M Scotch Brite handpads + Weights, total weigh is 135±1g）

BGD 1196---Abrasion Heads for ASMT D 2486（Nylon+ Weights, total weigh is 454±10g） 

BGD 1197---Special Brush Carrier for Sponges Abrasion Heads

BGD 1045---Abrasive pad（3M Scotch Brite® handpads）（ISO 11998；Size---90×39mm; Pack of 50 pairs）

BGD 1364---Special nylon brush （ASTM D 2486；1 pair）

BGD 1365/A---Hog Bristle Brush（1 pair）

BGD 1510---Sponges (ASTM D 3450;12 pcs)

BGD 1511---Sponges (ASTM D 4213 & ASTM 4828 ;12 pcs)

BGD 2355---Brass Shim （165×12.7×0.25mm；pack of 10 pairs）

BGD 2208---Black plastic panel（ 432×165×0.25mm；pack of 100 pcs）